Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
Previously, we cached domain constraints for the life of a query, or
really for the life of the FmgrInfo struct that was used to invoke
domain_in() or domain_check(). But plpgsql (and probably other places)
are set up to cache such FmgrInfos for the whole lifespan of a session,
which meant they could be enforcing really stale sets of constraints.
On the other hand, searching pg_constraint once per query gets kind of
expensive too: testing says that as much as half the runtime of a
trivial query such as "SELECT 0::domaintype" went into that.
To fix this, delegate the responsibility for tracking a domain's
constraints to the typcache, which has the infrastructure needed to
detect syscache invalidation events that signal possible changes.
This not only removes unnecessary repeat reads of pg_constraint,
but ensures that we never apply stale constraint data: whatever we
use is the current data according to syscache rules.
Unfortunately, the current configuration of the system catalogs means
we have to flush cached domain-constraint data whenever either pg_type
or pg_constraint changes, which happens rather a lot (eg, creation or
deletion of a temp table will do it). It might be worth rearranging
things to split pg_constraint into two catalogs, of which the domain
constraint one would probably be very low-traffic. That's a job for
another patch though, and in any case this patch should improve matters
materially even with that handicap.
This patch makes use of the recently-added memory context reset callback
feature to manage the lifespan of domain constraint caches, so that we
don't risk deleting a cache that might be in the midst of evaluation.
Although this is a bug fix as well as a performance improvement, no
back-patch. There haven't been many if any field complaints about
stale domain constraint checks, so it doesn't seem worth taking the
risk of modifying data structures as basic as MemoryContexts in back
branches.
Make it work more like FDW plans do: instead of assuming that there are
expressions in a CustomScan plan node that the core code doesn't know
about, insist that all subexpressions that need planner attention be in
a "custom_exprs" list in the Plan representation. (Of course, the
custom plugin can break the list apart again at executor initialization.)
This lets us revert the parts of the patch that exposed setrefs.c and
subselect.c processing to the outside world.
Also revert the GetSpecialCustomVar stuff in ruleutils.c; that concept
may work in future, but it's far from fully baked right now.
There seems no prospect that any of this will ever be useful, and indeed
it's questionable whether some of it would work if it ever got called;
it's certainly not been exercised in a very long time, if ever. So let's
get rid of it, and make the comments about mark/restore in execAmi.c less
wishy-washy.
The mark/restore support for Result nodes is also currently dead code,
but that's due to planner limitations not because it's impossible that
it could be useful. So I left it in.
Get rid of the pernicious entanglement between planner and executor headers
introduced by commit 0b03e5951b.
Also, rearrange the CustomFoo struct/typedef definitions so that all the
typedef names are seen as used by the compiler. Without this pgindent
will mess things up a bit, which is not so important perhaps, but it also
removes a bizarre discrepancy between the declaration arrangement used for
CustomExecMethods and that used for CustomScanMethods and
CustomPathMethods.
Clean up the commentary around ExecSupportsMarkRestore to reflect the
rather large change in its API.
Const-ify register_custom_path_provider's argument. This necessitates
casting away const in the function, but that seems better than forcing
callers of the function to do so (or else not const-ify their method
pointer structs, which was sort of the whole point).
De-export fix_expr_common. I don't like the exporting of fix_scan_expr
or replace_nestloop_params either, but this one surely has got little
excuse.
At one time it wasn't terribly important what column names were associated
with the fields of a composite Datum, but since the introduction of
operations like row_to_json(), it's important that looking up the rowtype
ID embedded in the Datum returns the column names that users would expect.
That did not work terribly well before this patch: you could get the column
names of the underlying table, or column aliases from any level of the
query, depending on minor details of the plan tree. You could even get
totally empty field names, which is disastrous for cases like row_to_json().
To fix this for whole-row Vars, look to the RTE referenced by the Var, and
make sure its column aliases are applied to the rowtype associated with
the result Datums. This is a tad scary because we might have to return
a transient RECORD type even though the Var is declared as having some
named rowtype. In principle it should be all right because the record
type will still be physically compatible with the named rowtype; but
I had to weaken one Assert in ExecEvalConvertRowtype, and there might be
third-party code containing similar assumptions.
Similarly, RowExprs have to be willing to override the column names coming
from a named composite result type and produce a RECORD when the column
aliases visible at the site of the RowExpr differ from the underlying
table's column names.
In passing, revert the decision made in commit 398f70ec07 to add
an alias-list argument to ExecTypeFromExprList: better to provide that
functionality in a separate function. This also reverts most of the code
changes in d685814835, which we don't need because we're no longer
depending on the tupdesc found in the child plan node's result slot to be
blessed.
Back-patch to 9.4, but not earlier, since this solution changes the results
in some cases that users might not have realized were buggy. We'll apply a
more restricted form of this patch in older branches.
This allows extension modules to define their own methods for
scanning a relation, and get the core code to use them. It's
unclear as yet how much use this capability will find, but we
won't find out if we never commit it.
KaiGai Kohei, reviewed at various times and in various levels
of detail by Shigeru Hanada, Tom Lane, Andres Freund, Álvaro
Herrera, and myself.
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
ExecMakeTableFunctionResult evaluated the arguments for a function-in-FROM
in the query-lifespan memory context. This is insignificant in simple
cases where the function relation is scanned only once; but if the function
is in a sub-SELECT or is on the inside of a nested loop, any memory
consumed during argument evaluation can add up quickly. (The potential for
trouble here had been foreseen long ago, per existing comments; but we'd
not previously seen a complaint from the field about it.) To fix, create
an additional temporary context just for this purpose.
Per an example from MauMau. Back-patch to all active branches.
This SQL-standard feature allows a sub-SELECT yielding multiple columns
(but only one row) to be used to compute the new values of several columns
to be updated. While the same results can be had with an independent
sub-SELECT per column, such a workaround can require a great deal of
duplicated computation.
The standard actually says that the source for a multi-column assignment
could be any row-valued expression. The implementation used here is
tightly tied to our existing sub-SELECT support and can't handle other
cases; the Bison grammar would have some issues with them too. However,
I don't feel too bad about this since other cases can be converted into
sub-SELECTs. For instance, "SET (a,b,c) = row_valued_function(x)" could
be written "SET (a,b,c) = (SELECT * FROM row_valued_function(x))".
Until now, when executing an aggregate function as a window function
within a window with moving frame start (that is, any frame start mode
except UNBOUNDED PRECEDING), we had to recalculate the aggregate from
scratch each time the frame head moved. This patch allows an aggregate
definition to include an alternate "moving aggregate" implementation
that includes an inverse transition function for removing rows from
the aggregate's running state. As long as this can be done successfully,
runtime is proportional to the total number of input rows, rather than
to the number of input rows times the average frame length.
This commit includes the core infrastructure, documentation, and regression
tests using user-defined aggregates. Follow-on commits will update some
of the built-in aggregates to use this feature.
David Rowley and Florian Pflug, reviewed by Dean Rasheed; additional
hacking by me
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
This is SQL-standard with a few extensions, namely support for
subqueries and outer references in clause expressions.
catversion bump due to change in Aggref and WindowFunc.
David Fetter, reviewed by Dean Rasheed.
This patch adds the core-system infrastructure needed to support updates
on foreign tables, and extends contrib/postgres_fdw to allow updates
against remote Postgres servers. There's still a great deal of room for
improvement in optimization of remote updates, but at least there's basic
functionality there now.
KaiGai Kohei, reviewed by Alexander Korotkov and Laurenz Albe, and rather
heavily revised by Tom Lane.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
There are probably other places where this can be used, but for now,
this just makes MergeAppend use it, so that this code will have test
coverage. There is other work in the queue that will use this, as
well.
Abhijit Menon-Sen, reviewed by Andres Freund, Robert Haas, Álvaro
Herrera, Tom Lane, and others.
When a whole-row Var is reading the result of a subquery, we need it to
ignore any "resjunk" columns that the subquery might have evaluated for
GROUP BY or ORDER BY purposes. We've hacked this area before, in commit
68e40998d0, but that fix only covered
whole-row Vars of named composite types, not those of RECORD type; and it
was mighty klugy anyway, since it just assumed without checking that any
extra columns in the result must be resjunk. A proper fix requires getting
hold of the subquery's targetlist so we can actually see which columns are
resjunk (whereupon we can use a JunkFilter to get rid of them). So bite
the bullet and add some infrastructure to make that possible.
Per report from Andrew Dunstan and additional testing by Merlin Moncure.
Back-patch to all supported branches. In 8.3, also back-patch commit
292176a118, which for some reason I had
not done at the time, but it's a prerequisite for this change.
Repeated execution of an uncorrelated ARRAY_SUBLINK sub-select (which
I think can only happen if the sub-select is embedded in a larger,
correlated subquery) would leak memory for the duration of the query,
due to not reclaiming the array generated in the previous execution.
Per bug #6698 from Armando Miraglia. Diagnosis and fix idea by Heikki,
patch itself by me.
This has been like this all along, so back-patch to all supported versions.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple. The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes. The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.
To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns. I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion. (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.) This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.
Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
This provides information about the numbers of tuples that were visited
but not returned by table scans, as well as the numbers of join tuples
that were considered and discarded within a join plan node.
There is still some discussion going on about the best way to report counts
for outer-join situations, but I think most of what's in the patch would
not change if we revise that, so I'm going to go ahead and commit it as-is.
Documentation changes to follow (they weren't in the submitted patch
either).
Marko Tiikkaja, reviewed by Marc Cousin, somewhat revised by Tom
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
This commit provides the core code and documentation needed. A contrib
module test case will follow shortly.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
Flattening of subquery range tables during setrefs.c could lead to the
rangetable indexes in PlanRowMark nodes not matching up with the column
names previously assigned to the corresponding resjunk ctid (resp. tableoid
or wholerow) columns. Typical symptom would be either a "cannot extract
system attribute from virtual tuple" error or an Assert failure. This
wasn't a problem before 9.0 because we didn't support FOR UPDATE below the
top query level, and so the final flattening could never renumber an RTE
that was relevant to FOR UPDATE. Fix by using a plan-tree-wide unique
number for each PlanRowMark to label the associated resjunk columns, so
that the number need not change during flattening.
Per report from David Johnston (though I'm darned if I can see how this got
past initial testing of the relevant code). Back-patch to 9.0.
In an inherited UPDATE/DELETE, each target table has its own subplan,
because it might have a column set different from other targets. This
means that the resjunk columns we add to support EvalPlanQual might be
at different physical column numbers in each subplan. The EvalPlanQual
rewrite I did for 9.0 failed to account for this, resulting in possible
misbehavior or even crashes during concurrent updates to the same row,
as seen in a recent report from Gordon Shannon. Revise the data structure
so that we track resjunk column numbers separately for each subplan.
I also chose to move responsibility for identifying the physical column
numbers back to executor startup, instead of assuming that numbers derived
during preprocess_targetlist would stay valid throughout subsequent
massaging of the plan. That's a bit slower, so we might want to consider
undoing it someday; but it would complicate the patch considerably and
didn't seem justifiable in a bug fix that has to be back-patched to 9.0.
This is advantageous first because it allows us to hash the smaller table
regardless of the outer-join type, and second because hash join can be more
flexible than merge join in dealing with arbitrary join quals in a FULL
join. For merge join all the join quals have to be mergejoinable, but hash
join will work so long as there's at least one hashjoinable qual --- the
others can be any condition. (This is true essentially because we don't
keep per-inner-tuple match flags in merge join, while hash join can do so.)
To do this, we need a has-it-been-matched flag for each tuple in the
hashtable, not just one for the current outer tuple. The key idea that
makes this practical is that we can store the match flag in the tuple's
infomask, since there are lots of bits there that are of no interest for a
MinimalTuple. So we aren't increasing the size of the hashtable at all for
the feature.
To write this without turning the hash code into even more of a pile of
spaghetti than it already was, I rewrote ExecHashJoin in a state-machine
style, similar to ExecMergeJoin. Other than that decision, it was pretty
straightforward.
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
and related routines.
We already had a redundant FunctionCallInfoData struct in FuncExprState,
but were using that copy only in set-returning-function cases, to avoid
keeping function evaluation state in the expression tree for the benefit
of plpgsql's "simple expression" logic. But of course that didn't work
anyway. Given the recent fixes in plpgsql there is no need to have two
separate behaviors here. Getting rid of the local FunctionCallInfoData
structs should make things a little faster (because we don't need to do
InitFunctionCallInfoData each time), and it also makes for a noticeable
reduction in stack space consumption during recursive calls.
Tom Lane