This patch eliminates the former need to sort the output of an Append scan
when an ordered scan of an inheritance tree is wanted. This should be
particularly useful for fast-start cases such as queries with LIMIT.
Original patch by Greg Stark, with further hacking by Hans-Jurgen Schonig,
Robert Haas, and Tom Lane.
a pass-by-reference datatype with a nontrivial projection step.
We were using the same memory context for the projection operation as for
the temporary context used by the hashtable routines in execGrouping.c.
However, the hashtable routines feel free to reset their temp context at
any time, which'd lead to destroying input data that was still needed.
Report and diagnosis by Tao Ma.
Back-patch to 8.1, where the problem was introduced by the changes that
allowed us to work with "virtual" tuples instead of materializing intermediate
tuple values everywhere. The earlier code looks quite similar, but it doesn't
suffer the problem because the data gets copied into another context as a
result of having to materialize ExecProject's output tuple.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
peculiar variant of UNION ALL, and so wouldn't likely get written directly
as-is, it's possible for it to arise as a result of simplification of
less-obviously-silly queries. In particular, now that we can do flattening
of subqueries that have constant outputs and are underneath an outer join,
it's possible for the case to result from simplification of queries of the
type exhibited in bug #5263. Back-patch to 8.4 to avoid a functionality
regression for this type of query.
8.2beta but never carried out. This avoids repetitive tests of whether the
argument is of scalar or composite type. Also, be a bit more paranoid about
composite arguments in some places where we previously weren't checking.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
TupleTableSlot nodes. This eliminates the need to count in advance
how many Slots will be needed, which seems more than worth the small
increase in the amount of palloc traffic during executor startup.
The ExecCountSlots infrastructure is now all dead code, but I'll remove it
in a separate commit for clarity.
Per a comment from Robert Haas.
values before they get passed to the index access method. This avoids
repeated detoastings that will otherwise ensue as the comparison value
is examined by various index support functions. We have seen a couple of
reports of cases where repeated detoastings result in an order-of-magnitude
slowdown, so it seems worth adding a bit of extra logic to prevent this.
I had previously proposed trying to avoid duplicate detoastings in general,
but this fix takes care of what seems the most important case in practice
with very little effort or risk.
Back-patch to 8.4 so that the PostGIS folk won't have to wait a year to
have this fix in a production release. (The issue exists further back,
of course, but the code's diverged enough to make backpatching further a
higher-risk action. Also it appears that the possible gains may be limited
in prior releases because of different handling of lossy operators.)
by supporting conversions in places that used to demand exact rowtype match.
Since this issue is certain to come up elsewhere (in fact, already has,
in ExecEvalConvertRowtype), factor out the support code into new core
functions for tuple conversion. I chose to put these in a new source
file since heaptuple.c is already overly long.
Heavily revised version of a patch by Pavel Stehule.
for simple Var targetlist entries all the time, even when there are other
entries that are not simple Vars. Also, ensure that we prefetch attributes
(with slot_getsomeattrs) for all Vars in the targetlist, even those buried
within expressions. In combination these changes seem to significantly
reduce the runtime for cases where tlists are mostly but not exclusively
Vars. Per my proposal of yesterday.
distribution, by creating a special fast path for the (first few) most common
values of the outer relation. Tuples having hashvalues matching the MCVs
are effectively forced to be in the first batch, so that we never write
them out to the batch temp files.
Bryce Cutt and Ramon Lawrence, with some editorialization by me.
GUC variable effective_io_concurrency controls how many concurrent block
prefetch requests will be issued.
(The best way to handle this for plain index scans is still under debate,
so that part is not applied yet --- tgl)
Greg Stark
bitmap. This is extracted from Greg Stark's posix_fadvise patch; it seems
worth committing separately, since it's potentially useful independently of
posix_fadvise.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
locate the target row, if the cursor was declared with FOR UPDATE or FOR
SHARE. This approach is more flexible and reliable than digging through the
plan tree; for instance it can cope with join cursors. But we still provide
the old code for use with non-FOR-UPDATE cursors. Per gripe from Robert Haas.
return the tableoid as well as the ctid for any FOR UPDATE targets that
have child tables. All child tables are listed in the ExecRowMark list,
but the executor just skips the ones that didn't produce the current row.
Curiously, this longstanding restriction doesn't seem to have been documented
anywhere; so no doc changes.
RETURNING clause, not just a SELECT as formerly.
A side effect of this patch is that when a set-returning SQL function is used
in a FROM clause, performance is improved because the output is collected into
a tuplestore within the function, rather than using the less efficient
value-per-call mechanism.
backwards scan could actually happen. In particular, pass a flag to
materialize-mode SRFs that tells them whether they need to require random
access. In passing, also suppress unneeded backward-scan overhead for a
Portal's holdStore tuplestore. Per my proposal about reducing I/O costs for
tuplestores.
via a tuplestore instead of value-per-call. Refactor a few things to reduce
ensuing code duplication with nodeFunctionscan.c. This represents the
reasonably noncontroversial part of my proposed patch to switch SQL functions
over to returning tuplestores. For the moment, SQL functions still do things
the old way. However, this change enables PL SRFs to be called in targetlists
(observe changes in plperl regression results).
implementation uses an in-memory hash table, so it will poop out for very
large recursive results ... but the performance characteristics of a
sort-based implementation would be pretty unpleasant too.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
This facility replaces the former mark/restore support but is otherwise
upward-compatible with previous uses. It's expected to be needed for
single evaluation of CTEs and also for window functions, so I'm committing
it separately instead of waiting for either one of those patches to be
finished. Per discussion with Greg Stark and Hitoshi Harada.
Note: I removed nodeFunctionscan's mark/restore support, instead of bothering
to update it for this change, because it was dead code anyway.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
This completes my project of improving usage of hashing for duplicate
elimination (aggregate functions with DISTINCT remain undone, but that's
for some other day).
As with the previous patches, this means we can INTERSECT/EXCEPT on datatypes
that can hash but not sort, and it means that INTERSECT/EXCEPT without ORDER
BY are no longer certain to produce sorted output.
filter to be used when INSERT or SELECT INTO has a plan that returns raw
disk tuples. The virtual-tuple-slot optimizations that were put in place
awhile ago mean that ExecInsert has to do ExecMaterializeSlot, and that
already copies the tuple if it's raw (and does so more efficiently than
a junk filter, too). So get rid of that logic. This in turn means that
we can throw away ExecMayReturnRawTuples, which wasn't used for any other
purpose, and was always a kluge anyway.
In passing, move a couple of SELECT-INTO-specific fields out of EState
and into the private state of the SELECT INTO DestReceiver, as was foreseen
in an old comment there. Also make intorel_receive use ExecMaterializeSlot
not ExecCopySlotTuple, for consistency with ExecInsert and to possibly save
a tuple copy step in some cases.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
then-delete on the current cursor row. The basic fix is that nodeTidscan.c
has to apply heap_get_latest_tid() to the current-scan-TID obtained from the
cursor query; this ensures we get the latest row version to work with.
However, since that only works if the query plan is a TID scan, we also have
to hack the planner to make sure only that type of plan will be selected.
(Formerly, the planner might decide to apply a seqscan if the table is very
small. This change is probably a Good Thing anyway, since it's hard to see
how a seqscan could really win.) That means the execQual.c code to support
CurrentOfExpr as a regular expression type is dead code, so replace it with
just an elog(). Also, add regression tests covering these cases. Note
that the added tests expose the fact that re-fetching an updated row
misbehaves if the cursor used FOR UPDATE. That's an independent bug that
should be fixed later. Per report from Dharmendra Goyal.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
are not one of the query's defined result relations, but nonetheless have
triggers fired against them while the query is active. This was formerly
impossible but can now occur because of my recent patch to fix the firing
order for RI triggers. Caching a ResultRelInfo avoids duplicating work by
repeatedly opening and closing the same relation, and also allows EXPLAIN
ANALYZE to "see" and report on these extra triggers. Use the same mechanism
to cache open relations when firing deferred triggers at transaction shutdown;
this replaces the former one-element-cache strategy used in that case, and
should improve performance a bit when there are deferred triggers on a number
of relations.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
is using mark/restore but not rewind or backward-scan capability. Insert a
materialize plan node between a mergejoin and its inner child if the inner
child is a sort that is expected to spill to disk. The materialize shields
the sort from the need to do mark/restore and thereby allows it to perform
its final merge pass on-the-fly; while the materialize itself is normally
cheap since it won't spill to disk unless the number of tuples with equal
key values exceeds work_mem.
Greg Stark, with some kibitzing from Tom Lane.
recompute the limit/offset immediately, so that the updated values are
available when the child's ReScan function is invoked. Add a regression
test for this, too. Bug is new in HEAD (due to the bounded-sorting patch)
so no need for back-patch.
I did not do anything about merging this signaling with chgParam processing,
but if we were to do that we'd still need to compute the updated values
at this point rather than during the first ProcNode call.
Per observation and test case from Greg Stark, though I didn't use his patch.
Itagaki Takahiro