The previous design for this had copyFile(), linkFile(), and
rewriteVisibilityMap() returning strerror strings, with the caller
producing one-size-fits-all error messages based on that. This made it
impossible to produce messages that described the failures with any degree
of precision, especially not short-read problems since those don't set
errno at all.
Since pg_upgrade has no intention of continuing after any error in this
area, let's fix this by just letting these functions call pg_fatal() for
themselves, making it easy for each point of failure to have a suitable
error message. Taking this approach also allows dropping cleanup code
that was unnecessary and was often rather sloppy about preserving errno.
To not lose relevant info that was reported before, pass in the schema name
and table name of the current table so that they can be included in the
error reports.
An additional problem was the use of getErrorText(), which was flat out
wrong for all but a couple of call sites, because it unconditionally did
"_dosmaperr(GetLastError())" on Windows. That's only appropriate when
reporting an error from a Windows-native API, which only a couple of
the callers were actually doing. Thus, even the reported strerror string
would be unrelated to the actual failure in many cases on Windows.
To fix, get rid of getErrorText() altogether, and just have call sites
do strerror(errno) instead, since that's the way all the rest of our
frontend programs do it. Add back the _dosmaperr() calls in the two
places where that's actually appropriate.
In passing, make assorted messages hew more closely to project style
guidelines, notably by removing initial capitals in not-complete-sentence
primary error messages. (I didn't make any effort to clean up places
I didn't have another reason to touch, though.)
Per discussion of a report from Thomas Kellerer. Back-patch to 9.6,
but no further; given the relative infrequency of reports of problems
here, it's not clear it's worth adapting the patch to older branches.
Patch by me, but with credit to Alvaro Herrera for spotting the issue
with getErrorText's misuse of _dosmaperr().
Discussion: <nsjrbh$8li$1@blaine.gmane.org>
This is new code in 9.6, and evidently we missed out testing it as
thoroughly as it should have been. Bugs fixed here:
1. Use binary not text mode to open the files on Windows. Before, if
the visibility map chanced to contain two bytes that looked like \r\n,
Windows' read() would convert that to \n, which both corrupts the map
data and causes the file to look shorter than it should. Unless you
were *very* unlucky and had an exact multiple of 8K such occurrences
in each VM file, this would cause pg_upgrade to report a failure,
though with a rather obscure error message.
2. The code for copying rebuilt bytes into the output was simply wrong.
It chanced to work okay on little-endian machines but would emit the
bytes in the wrong order on big-endian, leading to silent corruption
of the visibility map data.
3. The code was careless about alignment of the working buffers. Given
all three of an alignment-picky architecture, a compiler that chooses
to put the new_vmbuf[] local variable at an odd starting address, and
a checksum-enabled database, pg_upgrade would dump core.
Point one was reported by Thomas Kellerer, the other two detected by
code-reading.
Point two is much the nastiest of these issues from an impact standpoint,
though fortunately it affects only a minority of users. The Windows issue
will definitely bite people, but it seems quite unlikely that there would
be undetected corruption from that.
In addition, I failed to resist the temptation to do some minor cosmetic
adjustments, mostly improving the comments.
It would be a good idea to try to improve the error reporting here, but
that seems like material for a separate patch.
Discussion: <nsjrbh$8li$1@blaine.gmane.org>
Prototypes for functions implementing V1-callable functions are no
longer necessary.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Using exit() requires stdlib.h, which is not included. Use return
instead. Also add return type for main().
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Using offsetof() with a run-time computed argument is not allowed in
either C or C++. Apparently, gcc allows it, but g++ doesn't.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
There is a small window between when the server closes out the existing
segment and the new one is created. Put a loop around the open call in
this case to make sure we wait for the new file to actually appear.
Now that we track initial privileges on extension objects and changes to
those permissions, we can drop the superuser() checks from the various
functions which are part of the pgstattuple extension and rely on the
GRANT system to control access to those functions.
Since a pg_upgrade will preserve the version of the extension which
existed prior to the upgrade, we can't simply modify the existing
functions but instead need to create new functions which remove the
checks and update the SQL-level functions to use the new functions
(and to REVOKE EXECUTE rights on those functions from PUBLIC).
Thanks to Tom and Andres for adding support for extensions to follow
update paths (see: 40b449a), allowing this patch to be much smaller
since no new base version script needed to be included.
Approach suggested by Noah.
Reviewed by Michael Paquier.
This patch just exposes COPY's FROM PROGRAM option in contrib/file_fdw.
There don't seem to be any security issues with that that are any worse
than what already exist with file_fdw and COPY; as in the existing cases,
only superusers are allowed to control what gets executed.
A regression test case might be nice here, but choosing a 100% portable
command to run is hard. (We haven't got a test for COPY FROM PROGRAM
itself, either.)
Corey Huinker and Adam Gomaa, reviewed by Amit Langote
Discussion: <CADkLM=dGDGmaEiZ=UDepzumWg-CVn7r8MHPjr2NArj8S3TsROQ@mail.gmail.com>
Several places weren't careful about fsyncing in the way. See 1d4a0ab1
and 606e0f98 for details about required fsyncs.
This adds a couple of functions in src/common/ that have an equivalent
in the backend: durable_rename(), fsync_parent_path()
From: Michael Paquier <michael.paquier@gmail.com>
That makes the view a lot less disruptive to use on a production system.
Without the locks, you don't get a consistent snapshot across all buffers,
but that's OK. It wasn't a very useful guarantee in practice.
Ivan Kartyshov, reviewed by Tomas Vondra and Robert Haas.
Discusssion: <f9d6cab2-73a7-7a84-55a8-07dcb8516ae5@postgrespro.ru>
The list of files and directories that pg_basebackup excludes from the
backup was somewhat incomplete and unorganized. Change that with having
the exclusion driven from tables. Clean up some code around it. Also
document the exclusions in more detail so that users of pg_start_backup
can make use of it as well.
The contents of these directories are now excluded from the backup:
pg_dynshmem, pg_notify, pg_serial, pg_snapshots, pg_subtrans
Also fix a bug that a pg_repl_slot or pg_stat_tmp being a symlink would
cause a corrupt tar header to be created. Now such symlinks are
included in the backup as empty directories. Bug found by Ashutosh
Sharma <ashu.coek88@gmail.com>.
From: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Add a validity flag to DCHCacheEntry and NUMCacheEntry entries, and
do not set it true until after we've parsed the supplied format string.
This allows dealing with possible errors while parsing the format
without the baroque hack that was there before (which only covered
errors within NUMDesc_prepare, anyway). We can get rid of the PG_TRY in
NUMDesc_prepare, as well as last_NUMCacheEntry and NUM_cache_remove.
(Essentially, this reverts commit ff783fbae in favor of a less fragile
solution; the problems with that approach are well illustrated by later
hacking such as 55f927a46.)
In passing, define the size of these caches as DCH_CACHE_ENTRIES not
DCH_CACHE_FIELDS + 1 (whoever thought that was a good definition?)
and likewise for the NUM cache. Also const-ify format string parameters
where convenient, and merge duplicated cache lookup logic.
This is primarily driven by a proposed patch from Artur Zakirov,
which introduced some ereport's into format string parsing for
the datetime case. He proposed preventing the creation of invalid
cache entries by parsing the format string first into a local-variable
array, and then copying that to a cache entry. That seemed a bit
ugly to me, and anyway randomly different from the way the identical
problem had been solved for the numeric case. Let's make the two
sets of code more similar not less so.
I'm not sure whether we'll adopt the new error conditions Artur proposes,
but this patch seems like good code cleanup and future-proofing in any
case. The existing code is critically (and undocumented-ly) dependent on
no elog being thrown out of several nontrivial functions, which is trouble
waiting to happen, though it doesn't seem to be actively broken today.
Discussion: <b2a39359-3282-b402-f4a3-057aae500ee7@postgrespro.ru>
Historically, something like to_date('2009-06-40','YYYY-MM-DD') would
return '2009-07-10' because there was no prohibition on out-of-range
month or day numbers. This has been widely panned, and it also turns
out that Oracle throws an error in such cases. Since these functions
are nominally Oracle-compatibility features, let's change that.
There's no particular restriction on year (modulo the fact that the
scanner may not believe that more than 4 digits are year digits,
a matter to be addressed separately if at all). But we now check month,
day, hour, minute, second, and fractional-second fields, as well as
day-of-year and second-of-day fields if those are used.
Currently, no checks are made on ISO-8601-style week numbers or day
numbers; it's not very clear what the appropriate rules would be there,
and they're probably so little used that it's not worth sweating over.
Artur Zakirov, reviewed by Amul Sul, further adjustments by me
Discussion: <1873520224.1784572.1465833145330.JavaMail.yahoo@mail.yahoo.com>
See-Also: <57786490.9010201@wars-nicht.de>
The previous patch broke this by returning NULL for a failed CRC check,
which pg_controldata would then try to read. Fix by returning the
result of the CRC check in a separate argument.
Michael Paquier and myself
Commit 3fe3511d05 introduced a new
case into this function, but neglected to ensure that the "ondisk"
pointer got updated after a possible reallocation as the code does
in other cases.
Stas Kelvich, per diagnosis by Konstantin Knizhnik.
This makes the parameter easier to extend, to support other password-based
authentication protocols than MD5. (SCRAM is being worked on.)
The GUC still accepts on/off as aliases for "md5" and "plain", although
we may want to remove those once we actually add support for another
password hash type.
Michael Paquier, reviewed by David Steele, with some further edits by me.
Discussion: <CAB7nPqSMXU35g=W9X74HVeQp0uvgJxvYOuA4A-A3M+0wfEBv-w@mail.gmail.com>
Pushing an upper-level restriction clause into an unflattened
subquery-in-FROM is okay when the subquery contains no SRFs in its
targetlist, or when it does but the SRFs are unreferenced by the clause
*and the clause is not volatile*. Otherwise, we're changing the number
of times the clause is evaluated, which is bad for volatile quals, and
possibly changing the result, since a volatile qual might succeed for some
SRF output rows and not others despite not referencing any of the changing
columns. (Indeed, if the clause is something like "random() > 0.5", the
user is probably expecting exactly that behavior.)
We had most of these restrictions down, but not the one about the upper
clause not being volatile. Fix that, and add a regression test to
illustrate the expected behavior.
Although this is definitely a bug, it doesn't seem like back-patch
material, since possibly some users don't realize that the broken
behavior is broken and are relying on what happens now. Also, while
the added test is quite cheap in the wake of commit a4c35ea1c, it would
be much more expensive (or else messier) in older branches.
Per report from Tom van Tilburg.
Discussion: <CAP3PPDiucxYCNev52=YPVkrQAPVF1C5PFWnrQPT7iMzO1fiKFQ@mail.gmail.com>
The only field of this struct that other files have any need to touch
is the pointer to the TocEntry a worker is working on. (Well,
pg_backup_archiver.c is actually looking at workerStatus too, but that
can be finessed by specifying that the TocEntry pointer is NULL for a
non-busy worker.)
Hence, move out the TocEntry pointers to a separate array within
struct ParallelState, and then we can make struct ParallelSlot private.
I noted the possibility of this previously, but hadn't got round to
actually doing it.
Discussion: <1188.1464544443@sss.pgh.pa.us>
The existing APIs for creating and parsing command and status messages are
rather messy; for example, archive-format modules have to provide code
for constructing command messages, which is entirely pointless since
the code to read them is hard-wired in WaitForCommands() and hence
no format-specific variation is actually possible. But there's little
foreseeable reason to need format-specific variation anyway.
The situation for status messages is no better; at least those are both
constructed and parsed by format-specific code, but said code is quite
redundant since there's no actual need for format-specific variation.
To add insult to injury, the first API involves returning pointers to
static buffers, which is bad, while the second involves returning pointers
to malloc'd strings, which is safer but randomly inconsistent.
Hence, get rid of the MasterStartParallelItem and MasterEndParallelItem
APIs, and instead write centralized functions that construct and parse
command and status messages. If we ever do need more flexibility, these
functions can be the standard implementations of format-specific
callback methods, but that's a long way off if it ever happens.
Tom Lane, reviewed by Kevin Grittner
Discussion: <17340.1464465717@sss.pgh.pa.us>
The ListenToWorkers/ReapWorkerStatus APIs were messy and hard to use.
Instead, make DispatchJobForTocEntry register a callback function that
will take care of state cleanup, doing whatever had been done by the caller
of ReapWorkerStatus in the old design. (This callback is essentially just
the old mark_work_done function in the restore case, and a trivial test for
worker failure in the dump case.) Then we can have ListenToWorkers call
the callback immediately on receipt of a status message, and return the
worker to WRKR_IDLE state; so the WRKR_FINISHED state goes away.
This allows us to design a unified wait-for-worker-messages loop:
WaitForWorkers replaces EnsureIdleWorker and EnsureWorkersFinished as well
as the mess in restore_toc_entries_parallel. Also, we no longer need the
fragile API spec that the caller of DispatchJobForTocEntry is responsible
for ensuring there's an idle worker, since DispatchJobForTocEntry can just
wait until there is one.
In passing, I got rid of the ParallelArgs struct, which was a net negative
in terms of notational verboseness, and didn't seem to be providing any
noticeable amount of abstraction either.
Tom Lane, reviewed by Kevin Grittner
Discussion: <1188.1464544443@sss.pgh.pa.us>
It's always been possible to create a zero-dimensional cube by converting
from a zero-length float8 array, but cube_in failed to accept the '()'
representation that cube_out produced for that case, resulting in a
dump/reload hazard. Make it accept the case. Also fix a couple of
other places that didn't behave sanely for zero-dimensional cubes:
cube_size would produce 1.0 when surely the answer should be 0.0,
and g_cube_distance risked a divide-by-zero failure.
Likewise, it's always been possible to create cubes containing float8
infinity or NaN coordinate values, but cube_in couldn't parse such input,
and cube_out produced platform-dependent spellings of the values. Convert
them to use float8in_internal and float8out_internal so that the behavior
will be the same as for float8, as we recently did for the core geometric
types (cf commit 50861cd68). As in that commit, I don't pretend that this
patch fixes all insane corner-case behaviors that may exist for NaNs, but
it's a step forward.
(This change allows removal of the separate cube_1.out and cube_3.out
expected-files, as the platform dependency that previously required them
is now gone: an underflowing coordinate value will now produce an error
not plus or minus zero.)
Make errors from cube_in follow project conventions as to spelling
("invalid input syntax for cube" not "bad cube representation")
and errcode (INVALID_TEXT_REPRESENTATION not SYNTAX_ERROR).
Also a few marginal code cleanups and comment improvements.
Tom Lane, reviewed by Amul Sul
Discussion: <15085.1472494782@sss.pgh.pa.us>
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
The result of FD_ISSET() doesn't necessarily fit in a bool, though
assigning it to one might accidentally work depending on platform and which
socket FD number is being inquired of. Rewrite to test it with if(),
rather than making any specific assumption about the result width,
to match the way every other such call in PG is written.
Don't break out of the input_mask-filling loop after finding the first
client that we're waiting for results from. That mostly breaks parallel
query management.
Also, if we choose not to call select(), be sure to clear out any bits
the mask-filling loop might have set, so that we don't accidentally call
doCustom for clients we don't know have input. Doing so would likely
be harmless, but it's a waste of cycles and doesn't seem to be intended.
Make this_usec wide enough. (Yeah, the value would usually fit in an
int, but then why are we using int64 everywhere else?)
Minor cosmetic adjustments, mostly comment improvements.
Problems introduced by commit 12788ae49. The first issue was discovered
by buildfarm testing, the others by code review.
We had thirty different GIN array opclasses sharing the same operators and
support functions. That still didn't cover all the built-in types, nor
did it cover arrays of extension-added types. What we want is a single
polymorphic opclass for "anyarray". There were two missing features needed
to make this possible:
1. We have to be able to declare the index storage type as ANYELEMENT
when the opclass is declared to index ANYARRAY. This just takes a few
more lines in index_create(). Although this currently seems of use only
for GIN, there's no reason to make index_create() restrict it to that.
2. We have to be able to identify the proper GIN compare function for
the index storage type. This patch proceeds by making the compare function
optional in GIN opclass definitions, and specifying that the default btree
comparison function for the index storage type will be looked up when the
opclass omits it. Again, that seems pretty generically useful.
Since the comparison function lookup is done in initGinState(), making
use of the second feature adds an additional cache lookup to GIN index
access setup. It seems unlikely that that would be very noticeable given
the other costs involved, but maybe at some point we should consider
making GinState data persist longer than it now does --- we could keep it
in the index relcache entry, perhaps.
Rather fortuitously, we don't seem to need to do anything to get this
change to play nice with dump/reload or pg_upgrade scenarios: the new
opclass definition is automatically selected to replace existing index
definitions, and the on-disk data remains compatible. Also, if a user has
created a custom opclass definition for a non-builtin type, this doesn't
break that, since CREATE INDEX will prefer an exact match to opcintype
over a match to ANYARRAY. However, if there's anyone out there with
handwritten DDL that explicitly specifies _bool_ops or one of the other
replaced opclass names, they'll need to adjust that.
Tom Lane, reviewed by Enrique Meneses
Discussion: <14436.1470940379@sss.pgh.pa.us>
Evidently an oversight in commit 729205571. Back-patch to 9.2 where
privileges for types were introduced.
Report: <20160922173517.8214.88959@wrigleys.postgresql.org>
The doCustom() function had grown into quite a mess. Rewrite it, in a more
explicit state machine style, for readability.
This also fixes one minor bug: if a script consisted entirely of meta
commands, doCustom() never returned to the caller, so progress reports
with the -P option were not printed. I don't want to backpatch this
refactoring, and the bug is quite insignificant, so only commit this to
master, and leave the bug unfixed in back-branches.
Review and original bug report by Fabien Coelho.
Discussion: <alpine.DEB.2.20.1607090850120.3412@sto>
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
When configured with --enable-tap-tests, "make install" will now install
the Perl support files for TAP testing where PGXS will find them.
This allows extensions to rely on $(prove_check) even when being built
out-of-tree. Back-patch to 9.4 where we first started to support TAP
testing, to reduce the number of cases extension makefiles need to
consider.
Craig Ringer
Discussion: <CAMsr+YFXv+2qne6xJW7z_25mYBtktRX5rpkrgrb+DRgQ_FxgHQ@mail.gmail.com>
These worked as-is until around 7.0, but fail in newer versions because
there are more operators named "#". Besides it's a bit inconsistent that
only two of the examples on this page lack type names on their constants.
Report: <20160923081530.1517.75670@wrigleys.postgresql.org>
Faulty AND/OR nesting in the WHERE clause of getFuncs' SQL query led to
dumping range constructor functions if they are part of an extension
and we're in binary-upgrade mode. Actually, we don't want to dump them
separately even then, since CREATE TYPE AS RANGE will create the range's
constructor functions regardless. Per report from Andrew Dunstan.
It looks like this mistake was introduced by me, in commit b985d4877, in
perhaps-overzealous refactoring to reduce code duplication. I'm suitably
embarrassed.
Report: <34854939-02d7-f591-5677-ce2994104599@dunslane.net>
Apparent copy-and-pasteo in standby_desc_invalidations() had two
entries for msg->id == SHAREDINVALRELMAP_ID.
Aleksander Alekseev
Discussion: <20160923090814.GB1238@e733>
We must test GetLastError() even when CreateFileMapping() returns a
non-null handle. If that value were left over from some previous system
call, we might be fooled into thinking the segment already existed.
Experimentation on Windows 7 suggests that CreateFileMapping() clears
the error code on success, but it is not documented to do so, so let's
not rely on that happening in all Windows releases.
Amit Kapila
Discussion: <20811.1474390987@sss.pgh.pa.us>
Commits 470d886c3 et al intended to fix the problem that the postmaster
selected the same "random" DSM control segment ID on every start. But
using PostmasterRandom() for that destroys the intended property that the
delay between random_start_time and random_stop_time will be unpredictable.
(Said delay is probably already more predictable than we could wish, but
that doesn't mean that reducing it by a couple orders of magnitude is OK.)
Revert the previous patch and add a comment warning against misuse of
PostmasterRandom. Fix the original problem by calling srandom() early in
PostmasterMain, using a low-security seed that will later be overwritten
by PostmasterRandom.
Discussion: <20789.1474390434@sss.pgh.pa.us>
Past refactorings have removed all but one reference to SizeOfIptrData
(and that one place was in a pretty noncritical spot). Since nobody's
complained, it seems probable that there are no supported compilers
that don't think sizeof(ItemPointerData) is 6. If there are, we're
wasting MAXALIGN per heap tuple anyway, so it's rather silly to worry
about whether we can shave space in places like WAL records.
Pavan Deolasee
Discussion: <CABOikdOOawDda4hwLOT6zdA6MFfPLu3Z2YBZkX0JdayNS6JOeQ@mail.gmail.com>
Tom Lane