Move applicable code out of RelationBuildDesc(), which nailed relations
bypass. Non-assert builds experienced no known problems. Back-patch to
v13, where commit c6b92041d3 introduced
rd_firstRelfilenodeSubid.
Kyotaro Horiguchi. Reported by Justin Pryzby.
Discussion: https://postgr.es/m/20200907023737.GA7158@telsasoft.com
Commit 8e19a8264 changed the SIGQUIT handlers of almost all server
processes not to run atexit callbacks. The archiver process was
skipped, perhaps because it's not connected to shared memory; but
it's just as true here that running atexit callbacks in a signal
handler is unsafe. So let's make it work like the rest.
In HEAD and v13, we can use the common SignalHandlerForCrashExit
handler. Before that, just tweak pgarch_exit to use _exit(2)
explicitly.
Like the previous commit, back-patch to all supported branches.
Kyotaro Horiguchi, back-patching by me
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Commit 15cb2bd27 neglected to make the running text match the
tables, leaving the reader with the strong impression that
we cannot count. Also, don't drop an unrelated para between
a table and the para describing it.
Partitioning tuple route code assumes that the partition chosen while
descending the partition hierarchy is always the correct one. This is
true except when the partition is the default partition and another
partition has been added concurrently: the partition constraint changes
and we don't recheck it. This can lead to tuples mistakenly being added
to the default partition that should have been rejected.
Fix by rechecking the default partition constraint while descending the
hierarchy.
An isolation test based on the reproduction steps described by Hao Wu
(with tweaks for extra coverage) is included.
Backpatch to 12, where this bug came in with 898e5e3290.
Reported by: Hao Wu <hawu@vmware.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqFqBmcSSap4sFnCBUEL_VfOMmEKaQ3gwUhyfa4c7J_-nA@mail.gmail.com
Discussion: https://postgr.es/m/DM5PR0501MB3910E97A9EDFB4C775CF3D75A42F0@DM5PR0501MB3910.namprd05.prod.outlook.com
Historically, cancel_before_shmem_exit() just silently did nothing
if the specified callback wasn't the top-of-stack. The folly of
ignoring this case was exposed by the bugs fixed in 303640199 and
bab150045, so let's make it throw elog(ERROR) instead.
There is a decent argument to be made that PG_ENSURE_ERROR_CLEANUP
should use some separate infrastructure, so it wouldn't break if
something inside the guarded code decides to register a new
before_shmem_exit callback. However, a survey of the surviving
uses of before_shmem_exit() and PG_ENSURE_ERROR_CLEANUP doesn't
show any plausible conflicts of that sort today, so for now we'll
forgo the extra complexity. (It will almost certainly become
necessary if anyone ever wants to wrap PG_ENSURE_ERROR_CLEANUP
around arbitrary user-defined actions, though.)
No backpatch, since this is developer support not a production issue.
Bharath Rupireddy, per advice from Andres Freund, Robert Haas, and myself
Discussion: https://postgr.es/m/CALj2ACWk7j4F2v2fxxYfrroOF=AdFNPr1WsV+AGtHAFQOqm_pw@mail.gmail.com
The problem is caused by me (Andres) having ProcSleep() look at the
wrong PGPROC entry in 5788e258bb.
Unfortunately it seems hard to write a reliable test for autovacuum
cancellations. Perhaps somebody will come up with a good approach, but
it seems worth fixing the issue even without a test.
Reported-By: Jeff Janes <jeff.janes@gmail.com>
Author: Jeff Janes <jeff.janes@gmail.com>
Discussion: https://postgr.es/m/CAMkU=1wH2aUy+wDRDz+5RZALdcUnEofV1t9PzXS_gBJO9vZZ0Q@mail.gmail.com
This essentially reverts a micro-optimization I made years ago,
as part of the much larger commit d72f6c750. It's doubtful
that there was any hard evidence for it being helpful even then,
and the case is even more dubious now that modern compilers
are so much smarter about inlining memset().
The proximate reason for undoing it is to get rid of the type punning
inherent in MemSet, for fear that that may cause problems now that
we're applying additional optimization switches to numeric.c.
At the very least this'll silence some warnings from a few old
buildfarm animals.
(It's probably past time for another look at whether MemSet is still
worth anything at all, but I do not propose to tackle that question
right now.)
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
The isolation test added by a6642b3 is proving to be unstable, as once
the first transaction holding a lock on the top-most partitioned table
or on a partition commits, the commit order of the follow-up DROP TABLE
and REINDEX could become reversed depending on the timing.
The only part of the test that could be entirely reliable is the one
using a SHARE lock, allowing REINDEX to commit first, but it is the
least interesting of the set.
Per buildfarm members rorqual and mylodon.
Discussion: https://postgr.es/m/E1kFSBj-00062c-Mu@gemulon.postgresql.org
Until now, REINDEX was not able to work with partitioned tables and
indexes, forcing users to reindex partitions one by one. This extends
REINDEX INDEX and REINDEX TABLE so as they can accept a partitioned
index and table in input, respectively, to reindex all the partitions
assigned to them with physical storage (foreign tables, partitioned
tables and indexes are then discarded).
This shares some logic with schema and database REINDEX as each
partition gets processed in its own transaction after building a list of
relations to work on. This choice has the advantage to minimize the
number of invalid indexes to one partition with REINDEX CONCURRENTLY in
the event a cancellation or failure in-flight, as the only indexes
handled at once in a single REINDEX CONCURRENTLY loop are the ones from
the partition being working on.
Isolation tests are added to emulate some cases I bumped into while
developing this feature, particularly with the concurrent drop of a
leaf partition reindexed. However, this is rather limited as LOCK would
cause REINDEX to block in the first transaction building the list of
partitions.
Per its multi-transaction nature, this new flavor cannot run in a
transaction block, similarly to REINDEX SCHEMA, SYSTEM and DATABASE.
Author: Justin Pryzby, Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/db12e897-73ff-467e-94cb-4af03705435f.adger.lj@alibaba-inc.com
Tomas Vondra observed that the IO behavior for HashAgg tends to be
worse than for Sort. Penalize HashAgg IO costs accordingly.
Also, account for the CPU effort of spilling the tuples and reading
them back.
Discussion: https://postgr.es/m/20200906212112.nzoy5ytrzjjodpfh@development
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Experimentation shows that clang will auto-vectorize the critical
multiplication loop if the termination condition is written "i2 < limit"
rather than "i2 <= limit". This seems unbelievably stupid, but I've
reproduced it on both clang 9.0.1 (RHEL8) and 11.0.3 (macOS Catalina).
gcc doesn't care, so tweak the code to do it that way.
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
This allows us to skip some stat calls, by extending commit 861c6e7c to
cover Windows systems.
Author: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BFzxupGGN4GpUdbzZN%2Btn6FQPHo8w0Q%2BAPH5Wz8RG%2Bww%40mail.gmail.com
Fix one instance of a table cell overflow by adding a zero-width
space. The visual impact of this is minimal, but since this is
currently the only such case reported by FOP ("contents of ... exceed
the available area"), it seems worth getting rid of.
Some kernels can tell us the type of a "dirent", so we can avoid a call
to stat() or lstat() in many cases. Define a new function
get_dirent_type() to contain that logic, for use by the backend and
frontend versions of walkdir(), and perhaps other callers in future.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BFzxupGGN4GpUdbzZN%2Btn6FQPHo8w0Q%2BAPH5Wz8RG%2Bww%40mail.gmail.com
The previous version of the docs mentioned that files are rewritten,
implying that a second copy of each file gets created, but each file is
updated in-place.
Author: Michael Banck
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/858086b6a42fb7d17995b6175856f7e7ec44d0a2.camel@credativ.de
Backpatch-through: 12
This covers the functionality tests for streaming in-progress
subtransactions, streaming transactions containing rollback to savepoints,
and streaming transactions having DDLs.
Author: Tomas Vondra, Amit Kapila and Dilip Kumar
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Compile numeric.c with -ftree-vectorize where available, and adjust
the innermost loop of mul_var() so that it is amenable to being
auto-vectorized. (Mainly, that involves making it process the arrays
left-to-right not right-to-left.)
Applying -ftree-vectorize actually makes numeric.o smaller, at least
with my compiler (gcc 8.3.1 on x86_64), and it's a little faster too.
Independently of that, fixing the inner loop to be vectorizable also
makes things a bit faster. But doing both is a huge win for
multiplications with lots of digits. For me, the numeric regression
test is the same speed to within measurement noise, but numeric_big
is a full 45% faster.
We also looked into applying -funroll-loops, but that makes numeric.o
bloat quite a bit, and the additional speed improvement is very
marginal.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Replace CFLAGS_VECTOR with CFLAGS_UNROLL_LOOPS and CFLAGS_VECTORIZE,
allowing us to distinguish whether we want to apply -funroll-loops,
-ftree-vectorize, or both to a particular source file. Up to now
the only consumer of the symbol has been checksum.c which wants
both, so that there was no need to distinguish; but that's about
to change.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Refactor replace_string() to use a StringInfo for the modifiable
string argument. This allows the string to be of indefinite size
initially and/or grow substantially during replacement. The previous
logic in convert_sourcefiles_in() had a hard-wired limit of 1024
bytes on any line in input/*.sql or output/*.out files. While we've
not had reports of trouble yet, it'd surely have bit us someday.
This also fixes replace_string() so it won't get into an infinite
loop if the string-to-be-replaced is a substring of the replacement.
That's unlikely to happen in current usage, but the function surely
shouldn't depend on it.
Also fix ecpg_filter() to use a StringInfo and thereby remove its
hard limit of 300 bytes on the length of an ecpg source line.
Asim Rama Praveen and Georgios Kokolatos,
reviewed by Alvaro Herrera and myself
Discussion: https://postgr.es/m/y9Dlk2QhiZ39DhaB1QE9mgZ95HcOQKZCNtGwN7XCRKMdBRBnX_0woaRUtTjloEp4PKA6ERmcUcfq3lPGfKPOJ5xX2TV-5WoRYyySeNHRzdw=@protonmail.com
Letting the caller provide a StringInfo to read into is helpful when
the caller needs to merge lines or otherwise modify the data after
it's been read. Notably, now the code added by commit 8f8154a50
can use pg_get_line_append() instead of having its own copy of that
logic. A follow-on commit will also make use of this.
Also, since StringInfo buffers are a minimum of 1KB long, blindly
using pg_get_line() in a loop can eat a lot more memory than one would
expect. I discovered for instance that commit e0f05cd5b caused initdb
to consume circa 10MB to read postgres.bki, even though that's under
1MB worth of data. A less memory-hungry alternative is to re-use the
same StringInfo for all lines and pg_strdup the results.
Discussion: https://postgr.es/m/1315832.1599345736@sss.pgh.pa.us
We reported the wrong types when complaining that an aggregate's
moving-aggregate implementation is inconsistent with its regular
implementation.
This was wrong since the feature was introduced, so back-patch
to all supported branches.
Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1x808LH=LPhZp9mNSP0Xd1xDqEd+XeGcvEe48dfE6xV=A@mail.gmail.com
This is duplicative of an lstat that was just done by the calling
function (traverse_datadir), besides which we weren't really doing
anything with the results. There's not much point in checking to
see if someone removed the file since the previous lstat, since the
FILE_ACTION_REMOVE code would have to deal with missing-file cases
anyway. Moreover, the "exists = false" assignment was a dead store;
nothing was done with that value later.
A syscall saved is a syscall earned, so back-patch to 9.5
where this code was introduced.
Discussion: https://postgr.es/m/1221796.1599329320@sss.pgh.pa.us
At some point back in the last century, somebody felt that reading
all of pg_type twice was cheaper, or at least easier, than using
repalloc() to resize the Typ[] array dynamically. That seems like an
entirely wacko proposition, so rewrite the code to do it the other
way. (To add insult to injury, there were two not-quite-identical
copies of said code.)
initdb.c's readfile() function had the same disease of preferring
to do double the I/O to avoid resizing its output array. Here,
we can make things easier by using the just-invented pg_get_line()
function to handle reading individual lines without a predetermined
notion of how long they are.
On my machine, it's difficult to detect any net change in the
overall runtime of initdb from these changes; but they should
help on slower buildfarm machines (especially since a buildfarm
cycle involves a lot of initdb's these days).
My attention was drawn to these places by scan-build complaints,
but on inspection they needed a lot more work than just suppressing
dead stores :-(
This commit improves the dependency registrations by taking advantage of
the preliminary work done in 63110c62, to group together the insertion
of dependencies of the same type to pg_depend. With the current layer
of routines available, and as only dependencies of the same type can be
grouped, there are code paths still doing more than one multi-insert
when it is necessary to register dependencies of multiple types
(constraint and index creation are two cases doing that).
While on it, this refactors some of the code to use ObjectAddressSet()
when manipulating object addresses.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera
Discussion: https://postgr.es/m/20200807061619.GA23955@paquier.xyz
The basic tests that defined SQL functions didn't actually run the
functions to see if they worked. Add that, and also fix a minor
mistake in a function that was revealed by this. (This is not a
question of test coverage, since there are other places where SQL
functions are run, but it is a bit of a silly test design.)
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
This is a follow-up of the work done in e3931d01. This case is a bit
different than pg_attribute and pg_shdepend: the maximum number of items
to insert is known in advance, but there is no need to handle pinned
dependencies. Hence, the base allocation for slots is done based on the
number of items and the maximum allowed with a cap at 64kB. Slots are
initialized once used to minimize the overhead of the operation.
The insertions can be done for dependencies of the same type. More
could be done by grouping the insertion of multiple dependency types in
a single batch. This is left as future work.
Some of the multi-insert logic is also simplified for pg_shdepend, as
per the feedback discussed for this specific patch. This also moves to
indexing.h the variable capping the maximum amount of data that can be
used at once for a multi-insert, instead of having separate definitions
for pg_attribute, pg_depend and pg_shdepend.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera
Discussion: https://postgr.es/m/20200807061619.GA23955@paquier.xyz
I happened to notice that the new test case I added in b55b4dad9
falls over if one runs "make check" repeatedly; though not in branches
after v10. That's because it was assuming that tmp_check/pgpass
wouldn't exist already. However, it's only been since v11 that the
Makefiles forcibly remove all of tmp_check/ before starting a TAP run.
This fix to unlink the file is therefore strictly necessary only in
v10 ... but it seems wisest to do it across the board, rather than
let the test rely on external logic to get the conditions right.
Commit 3f60f690f only partially fixed the broken-status-tracking
issue in LogicalRepApplyLoop: we need ping_sent to have the same
lifetime as last_recv_timestamp. The effects are much less serious
than what that commit fixed, though. AFAICS this would just lead to
extra ping requests being sent, once per second until the sender
responds. Still, it's a bug, so backpatch to v10 as before.
Discussion: https://postgr.es/m/959627.1599248476@sss.pgh.pa.us
When reading a WAL record fails to find continuation record(s) of the
proper length, report what it expects, for clarity.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200903212152.GA15319@alvherre.pgsql
If this data is not collected, pg_dump segfaults if asked for column
inserts.
Fix by Fabrízio de Royes Mello
Backpatch to release 12 where the bug was introduced.
The "DROP ACCESS METHOD gist2" test will require locking the index
to be dropped and then its table; while most ordinary operations
lock a table first then its index. While no concurrent test scripts
should be touching fast_emp4000, autovacuum might chance to be
processing that table when the DROP runs, resulting in a deadlock
failure. This is pretty rare but we see it in the buildfarm from
time to time.
To fix, acquire a lock on fast_emp4000 before issuing the DROP.
Since the point of the exercise is mostly to prevent buildfarm
failures, back-patch to 9.6 where this test was introduced.
Discussion: https://postgr.es/m/839004.1599185607@sss.pgh.pa.us
Noah Misch