Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
Previously if a promotion was triggered while recovery was paused,
the paused state continued. Also recovery could be paused by executing
pg_wal_replay_pause() even while a promotion was ongoing. That is,
recovery pause had higher priority over a standby promotion.
But this behavior was not desirable because most users basically wanted
the recovery to complete as soon as possible and the server to become
the master when they requested a promotion.
This commit changes recovery so that it prefers a promotion over
recovery pause. That is, if a promotion is triggered while recovery
is paused, the paused state ends and a promotion continues. Also
this commit makes recovery pause functions like pg_wal_replay_pause()
throw an error if they are executed while a promotion is ongoing.
Internally, this commit adds new internal function PromoteIsTriggered()
that returns true if a promotion is triggered. Since the name of
this function and the existing function IsPromoteTriggered() are
confusingly similar, the commit changes the name of IsPromoteTriggered()
to IsPromoteSignaled, as more appropriate name.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi, Sergei Kornilov
Discussion: https://postgr.es/m/00c194b2-dbbb-2e8a-5b39-13f14048ef0a@oss.nttdata.com
Use the new MyBackendType instead. More similar changes for other "am
something" variables are possible. This one was just particularly
simple.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Where possible, share signal handler code and main loop interrupt
checking. This saves quite a bit of code and should simplify
maintenance, too.
This commit intends not to change the way anything works, even
though that might allow more code to be unified. It does unify
a bunch of individual variables into a ShutdownRequestPending
flag that has is now used by a bunch of different process types,
though.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
Previously, md.c and checkpointer.c were tightly integrated so that
fsync calls could be handed off and processed in the background.
Introduce a system of callbacks and file tags, so that other modules
can hand off fsync work in the same way.
For now only md.c uses the new interface, but other users are being
proposed. Since there may be use cases that are not strictly SMGR
implementations, use a new function table for sync handlers rather
than extending the traditional SMGR one.
Instead of using a bitmapset of segment numbers for each RelFileNode
in the checkpointer's hash table, make the segment number part of the
key. This requires sending explicit "forget" requests for every
segment individually when relations are dropped, but suits the file
layout schemes of proposed future users better (ie sparse or high
segment numbers).
Author: Shawn Debnath and Thomas Munro
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAEepm=2gTANm=e3ARnJT=n0h8hf88wqmaZxk0JYkxw+b21fNrw@mail.gmail.com
This change makes it possible to specify sub-millisecond delays,
which work well on most modern platforms, though that was not true
when the cost-delay feature was designed.
To support this without breaking existing configuration entries,
improve guc.c to allow floating-point GUCs to have units. Also,
allow "us" (microseconds) as an input/output unit for time-unit GUCs.
(It's not allowed as a base unit, at least not yet.)
Likewise change the autovacuum_vacuum_cost_delay reloption to be
floating-point; this forces a catversion bump because the layout of
StdRdOptions changes.
This patch doesn't in itself change the default values or allowed
ranges for these parameters, and it should not affect the behavior
for any already-allowed setting for them.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
Background workers, including parallel workers, were generating
the same sequence of numbers in random(). This showed up as DSM
handle collisions when Parallel Hash created multiple segments,
but any code that calls random() in background workers could be
affected if it cares about different backends generating different
numbers.
Repair by making sure that all new processes initialize the seed
at the same time as they set MyProcPid and MyStartTime in a new
function InitProcessGlobals(), called by the postmaster, its
children and also standalone processes. Also add a new high
resolution MyStartTimestamp as a potentially useful by-product,
and remove SessionStartTime from struct Port as it is now
redundant.
No back-patch for now, as the known consequences so far are just
a bunch of harmless shm_open(O_EXCL) collisions.
Author: Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D2eJj_6%3DB%2B2tEpGu2nf1BjthCf9nXXUouYvJJ4C5WSwhg%40mail.gmail.com
Currently there are two ways to trigger log rotation in logging collector
process: call pg_rotate_logfile() SQL-function or send SIGUSR1 signal directly
to logging collector process. However, it's nice to have more suitable way
for external tools to do that, which wouldn't require SQL connection or
knowledge of logging collector pid. This commit implements triggering log
rotation by "pg_ctl logrotate" command.
Discussion: https://postgr.es/m/20180416.115435.28153375.horiguchi.kyotaro%40lab.ntt.co.jp
Author: Kyotaro Horiguchi, Alexander Kuzmenkov, Alexander Korotkov
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Autovacuum's 'workitem' request queue is of limited size, so requests
can fail if they arrive more quickly than autovacuum can process them.
Emit a log message when this happens, to provide better visibility of
this.
Backpatch to 10. While this represents an API change for
AutoVacuumRequestWork, that function is not yet prepared to deal with
external modules calling it, so there doesn't seem to be any risk (other
than log spam, that is.)
Author: Masahiko Sawada
Reviewed-by: Fabrízio Mello, Ildar Musin, Álvaro Herrera
Discussion: https://postgr.es/m/CAD21AoB1HrQhp6_4rTyHN5kWEJCEsG8YzsjZNt-ctoXSn5Uisw@mail.gmail.com
Add bgw_type field to background worker structure. It is intended to be
set to the same value for all workers of the same type, so they can be
grouped in pg_stat_activity, for example.
The backend_type column in pg_stat_activity now shows bgw_type for a
background worker. The ps listing also no longer calls out that a
process is a background worker but just show the bgw_type. That way,
being a background worker is more of an implementation detail now that
is not shown to the user. However, most log messages still refer to
'background worker "%s"'; otherwise constructing sensible and
translatable log messages would become tricky.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
To prevent future bugs along the lines of the one corrected by commit
8ff518699f, or find any that remain
in the current code, add an Assert() that the difference between
parallel_register_count and parallel_terminate_count is in a sane
range.
Kuntal Ghosh, with considerable tidying-up by me, per a suggestion
from Neha Khatri. Reviewed by Tomas Vondra.
Discussion: http://postgr.es/m/CAFO0U+-E8yzchwVnvn5BeRDPgX2z9vZUxQ8dxx9c0XFGBC7N1Q@mail.gmail.com
Previously, only VACUUM would cause a page range to get initially
summarized by BRIN indexes, which for some use cases takes too much time
since the inserts occur. To avoid the delay, have brininsert request a
summarization run for the previous range as soon as the first tuple is
inserted into the first page of the next range. Autovacuum is in charge
of processing these requests, after doing all the regular vacuuming/
analyzing work on tables.
This doesn't impose any new tasks on autovacuum, because autovacuum was
already in charge of doing summarizations. The only actual effect is to
change the timing, i.e. that it occurs earlier. For this reason, we
don't go any great lengths to record these requests very robustly; if
they are lost because of a server crash or restart, they will happen at
a later time anyway.
Most of the new code here is in autovacuum, which can now be told about
"work items" to process. This can be used for other things such as GIN
pending list cleaning, perhaps visibility map bit setting, both of which
are currently invoked during vacuum, but do not really depend on vacuum
taking place.
The requests are at the page range level, a granularity for which we did
not have SQL-level access; we only had index-level summarization
requests via brin_summarize_new_values(). It seems reasonable to add
SQL-level access to range-level summarization too, so add a function
brin_summarize_range() to do that.
Authors: Álvaro Herrera, based on sketch from Simon Riggs.
Reviewed-by: Thomas Munro.
Discussion: https://postgr.es/m/20170301045823.vneqdqkmsd4as4ds@alvherre.pgsql
On EXEC_BACKEND builds, this can fail if ASLR is in use.
Backpatch to 9.5. On master, completely remove the bgw_main field
completely, since there is no situation in which it is safe for an
EXEC_BACKEND build. On 9.6 and 9.5, leave the field intact to avoid
breaking things for third-party code that doesn't care about working
under EXEC_BACKEND. Prior to 9.5, there are no in-core bgworker
entrypoints.
Petr Jelinek, reviewed by me.
Discussion: http://postgr.es/m/09d8ad33-4287-a09b-a77f-77f8761adb5e@2ndquadrant.com
The syslogger will write out the current stderr and csvlog names, if
it's running and there are any, to a new file in the data directory
called "current_logfiles". We take care to remove this file when it
might no longer be valid (but not at shutdown). The function
pg_current_logfile() can be used to read the entries in the file.
Gilles Darold, reviewed and modified by Karl O. Pinc, Michael
Paquier, and me. Further review by Álvaro Herrera and Christoph Berg.
Tom Lane observed buildfarm failures caused by the select_parallel
regression test trying to launch new parallel queries before the
worker slots used by the previous ones were freed. Try to fix this by
having the postmaster free the worker slots before it sends the
SIGUSR1 notifications to the registering process. This doesn't
completely eliminate the possibility that the user backend might
(correctly) observe the worker as dead before the slot is free, but I
believe it should make the window significantly narrower.
Patch by me, per complaint from Tom Lane. Reviewed by Amit Kapila.
Discussion: http://postgr.es/m/30673.1487310734@sss.pgh.pa.us
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
Commits 470d886c3 et al intended to fix the problem that the postmaster
selected the same "random" DSM control segment ID on every start. But
using PostmasterRandom() for that destroys the intended property that the
delay between random_start_time and random_stop_time will be unpredictable.
(Said delay is probably already more predictable than we could wish, but
that doesn't mean that reducing it by a couple orders of magnitude is OK.)
Revert the previous patch and add a comment warning against misuse of
PostmasterRandom. Fix the original problem by calling srandom() early in
PostmasterMain, using a low-security seed that will later be overwritten
by PostmasterRandom.
Discussion: <20789.1474390434@sss.pgh.pa.us>
Pinning/Unpinning a buffer is a very frequent operation; especially in
read-mostly cache resident workloads. Benchmarking shows that in various
scenarios the spinlock protecting a buffer header's state becomes a
significant bottleneck. The problem can be reproduced with pgbench -S on
larger machines, but can be considerably worse for queries which touch
the same buffers over and over at a high frequency (e.g. nested loops
over a small inner table).
To allow atomic operations to be used, cram BufferDesc's flags,
usage_count, buf_hdr_lock, refcount into a single 32bit atomic variable;
that allows to manipulate them together using 32bit compare-and-swap
operations. This requires reducing MAX_BACKENDS to 2^18-1 (which could
be lifted by using a 64bit field, but it's not a realistic configuration
atm).
As not all operations can easily implemented in a lockfree manner,
implement the previous buf_hdr_lock via a flag bit in the atomic
variable. That way we can continue to lock the header in places where
it's needed, but can get away without acquiring it in the more frequent
hot-paths. There's some additional operations which can be done without
the lock, but aren't in this patch; but the most important places are
covered.
As bufmgr.c now essentially re-implements spinlocks, abstract the delay
logic from s_lock.c into something more generic. It now has already two
users, and more are coming up; there's a follupw patch for lwlock.c at
least.
This patch is based on a proof-of-concept written by me, which Alexander
Korotkov made into a fully working patch; the committed version is again
revised by me. Benchmarking and testing has, amongst others, been
provided by Dilip Kumar, Alexander Korotkov, Robert Haas.
On a large x86 system improvements for readonly pgbench, with a high
client count, of a factor of 8 have been observed.
Author: Alexander Korotkov and Andres Freund
Discussion: 2400449.GjM57CE0Yg@dinodell
Commit 4de82f7d7 increased the WAL flush rate, mainly to increase the
likelihood that hint bits can be set quickly. More quickly set hint bits
can reduce contention around the clog et al. But unfortunately the
increased flush rate can have a significant negative performance impact,
I have measured up to a factor of ~4. The reason for this slowdown is
that if there are independent writes to the underlying devices, for
example because shared buffers is a lot smaller than the hot data set,
or because a checkpoint is ongoing, the fdatasync() calls force cache
flushes to be emitted to the storage.
This is achieved by flushing WAL only if the last flush was longer than
wal_writer_delay ago, or if more than wal_writer_flush_after (new GUC)
unflushed blocks are pending. Based on some tests the default for
wal_writer_delay is 1MB, which seems to work well both on SSD and
rotational media.
To avoid negative performance impact due to 4de82f7d7 an earlier
commit (db76b1e) made SetHintBits() more likely to succeed; preventing
performance regressions in the pgbench tests I performed.
Discussion: 20160118163908.GW10941@awork2.anarazel.de
Up until now, the total amount of data that could be passed to a
background worker at startup was one datum, which can be a small as
4 bytes on some systems. That's enough to pass a dsm_handle or an
array index, but not much else. Add a bgw_extra flag to the
BackgroundWorker struct, allowing up to 128 bytes to be passed to
a new worker on any platform.
Use this to fix a problem I recently discovered with the parallel
context machinery added in 9.5: the master assigns each worker an
array index, and each worker subsequently assigns itself an array
index, and there's nothing to guarantee that the two sets of indexes
match, leading to chaos.
Normally, I would not back-patch the change to add bgw_extra, since it
is basically a feature addition. However, since 9.5 is still in beta
and there seems to be no other sensible way to repair the broken
parallel context machinery, back-patch to 9.5. Existing background
worker code can ignore the bgw_extra field without a problem, but
might need to be recompiled since the structure size has changed.
Report and patch by me. Review by Amit Kapila.
Previously, we would archive the possible-incomplete WAL segment with its
normal filename, but that causes trouble if the server owning that timeline
is still running, and tries to archive the same segment later. It's not nice
for the standby to trip up the master's archival like that. And it's pretty
confusing, anyway, to have an incomplete segment in the archive that's
indistinguishable from a normal, complete segment.
To avoid such confusion, add a .partial suffix to the file. Or to be more
precise, make a copy of the old segment under the .partial suffix, and
archive that instead of the original file. pg_receivexlog also uses the
.partial suffix for the same purpose, to tell apart incompletely streamed
files from complete ones.
There is no automatic mechanism to use the .partial files at recovery, so
they will go unused, unless the administrator manually copies to them to
the pg_xlog directory (and removes the .partial suffix). Recovery won't
normally need the WAL - when recovering to the new timeline, it will find
the same WAL on the first segment on the new timeline instead - but it
nevertheless feels better to archive the file with the .partial suffix, for
debugging purposes if nothing else.
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
Sometimes it's useful for a background worker to be able to initialize
its database connection by OID rather than by name, so provide a way
to do that.
Just as we would start bgworkers immediately after an initial startup
of the server, we should restart them immediately when reinitializing.
Petr Jelinek and Robert Haas
David Rowley