This fixes a bug that, under some circumstances, would cause MERGE to
fail to properly recompute expressions for GENERATED STORED columns.
Formerly, ExecInitModifyTable() did not call ExecInitStoredGenerated()
for a MERGE command, which meant that the generated expressions
information was not computed until later, when the first merge action
was executed. However, if the first merge action to execute was an
UPDATE, then ExecInitStoredGenerated() could decide to skip some some
generated columns, if the columns on which they depended were not
updated, which was a problem if the MERGE also contained an INSERT
action, for which no generated columns should be skipped.
So fix by having ExecInitModifyTable() call ExecInitStoredGenerated()
for MERGE, and assume that it isn't safe to skip any generated columns
in a MERGE. Possibly that could be relaxed, by allowing some generated
columns to be skipped for a MERGE without an INSERT action, but it's
not clear that it's worth the effort.
Noticed while investigating bug #17759. Back-patch to v15, where MERGE
was added.
Dean Rasheed, reviewed by Tom Lane.
Discussion:
https://postgr.es/m/17759-e76d9bece1b5421c%40postgresql.orghttps://postgr.es/m/CAEZATCXb_ezoMCcL0tzKwRGA1x0oeE%3DawTaysRfTPq%2B3wNJn8g%40mail.gmail.com
Rename the developer option 'logical_decoding_mode' to the more flexible
name 'logical_replication_mode' because doing so will make it easier to
extend this option in the future to help test other areas of logical
replication.
Currently, it is used on the publisher side to allow streaming or
serializing each change in logical decoding. In the upcoming patch, we are
planning to use it on the subscriber. On the subscriber, it will allow
serializing the changes to file and notifies the parallel apply workers to
read and apply them at the end of the transaction.
We discussed exposing this parameter as a subscription option but
it did not seem advisable since it is primarily used for testing/debugging
and there is no other such parameter. We also discussed having separate
GUCs for publisher and subscriber but for current testing/debugging
requirements, one GUC is sufficient.
Author: Hou Zhijie
Reviewed-by: Peter Smith, Kuroda Hayato, Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoAy2c=Mx=FTCs+EwUsf2kQL5MmU3N18X84k0EmCXntK4g@mail.gmail.com
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Split out "ConfigOptionIsVisible" to perform the privilege
check for GUC_SUPERUSER_ONLY GUCs (which these days can also
be read by pg_read_all_settings role members), and move the
should-we-show-it checks from GetConfigOptionValues to its
sole caller.
This commit also removes get_explain_guc_options's check of
GUC_NO_SHOW_ALL, which seems to have got cargo-culted in there.
While there's no obvious use-case for marking a GUC both
GUC_EXPLAIN and GUC_NO_SHOW_ALL, if it were set up that way
one would expect EXPLAIN to show it --- if that's not what
you want, then don't set GUC_EXPLAIN.
In passing, simplify the loop logic in show_all_settings.
Nitin Jadhav, Bharath Rupireddy, Tom Lane
Discussion: https://postgr.es/m/CAMm1aWYgfekpRK-Jz5=pM_bV+Om=ktGq1vxTZ_dr1Z6MV-qokA@mail.gmail.com
This includes a unification of the logic used to find the excludes file
and the typedefs file.
Also, remove the dangerous and deprecated feature where the first
non-option argument was taken as a typdefs file if it wasn't a .c or .h
file, remove some extraneous blank lines, and improve the documentation
somewhat.
We have the long-standing logic to append "postgresql" to some
installation paths if it does not already contain "pgsql" or
"postgres". The existing meson implementation of that only considered
the subdirectory under the prefix, not the prefix itself. Fix that,
so that it now works the same way as the implementation in
Makefile.global.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/a6a6de12-f705-2b33-2fd9-9743277deb08@enterprisedb.com
9d9c02ccd introduced runConditions for window functions to allow
monotonic window function evaluation to be made more efficient when the
window function value went beyond some value that it would never go back
from due to its monotonic nature. That commit added prosupport functions
to inform the planner that row_number(), rank(), dense_rank() and some
forms of count(*) were monotonic. Here we add support for ntile(),
cume_dist() and percent_rank().
Reviewed-by: Melanie Plageman
Discussion: https://postgr.es/m/CAApHDvqR+VqB8s+xR-24bzJbU8xyFrBszJ17qKgECf7cWxLCaA@mail.gmail.com
pg_restore -l has always been able to read the TOC data of a dump even
if its binary has no support for compression, for both compressed and
uncompressed dumps. 5e73a60 has introduced a backward-incompatible
behavior by switching a warning to a hard error in the code path reading
the header data of a dump, preventing the TOC items to be listed even if
pg_restore -l, with no support for compression, is used on a compressed
dump. Most modern systems should have support for zlib, but it can be
also possible that somebody relies on the past behavior when copying
over a dump where binaries are not built with zlib support (most likely
some WIN32 flavors these days, though most environments should provide
that).
There is no easy way to have a regression test for this pattern, as it
requires a mix of dump/restore commands with different compilation
options, with and without compression. One possibility I see here would
be to have a command-line option that enforces a non-compression check
for a build that supports compression, but that does not seem worth the
cost, either.
Reported-by: Justin Pryzby
Author: Georgios Kokolatos
Discussion: https://postgr.es/m/20230125180020.GF22427@telsasoft.com
We'd like to use TimestampDifferenceMilliseconds with the stop_time
possibly being TIMESTAMP_INFINITY, but up to now it's disclaimed
responsibility for overflow cases. Define it to clamp its output to
the range [0, INT_MAX], handling overflow correctly. (INT_MAX rather
than LONG_MAX seems appropriate, because the function is already
described as being intended for calculating wait times for WaitLatch
et al, and that infrastructure only handles waits up to INT_MAX.
Also, this choice gets rid of cross-platform behavioral differences.)
Having done that, we can replace some ad-hoc code in walreceiver.c
with a simple call to TimestampDifferenceMilliseconds.
While at it, fix some buglets in existing callers of
TimestampDifferenceMilliseconds: basebackup_copy.c had not read the
memo about TimestampDifferenceMilliseconds never returning a negative
value, and postmaster.c had not read the memo about Min() and Max()
being macros with multiple-evaluation hazards. Neither of these
quite seem worth back-patching.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/3126727.1674759248@sss.pgh.pa.us
Avoid having walreceiver code know explicitly about the precision
and underlying datatype of TimestampTz. (There is still one
calculation that knows that, which should be replaced with use of
TimestampDifferenceMilliseconds; but we need to figure out what to do
about overflow cases first.)
In support of this, provide a TimestampTzPlusSeconds macro, as well
as TIMESTAMP_INFINITY and TIMESTAMP_MINUS_INFINITY macros. (We could
have used the existing DT_NOEND and DT_NOBEGIN symbols, but I judged
those too opaque and confusing.)
Move GetCurrentTimestamp calls so that it's more obvious that we
are not using stale values of "now" anyplace. This doesn't result
in net more calls, and might indeed make for net fewer.
Avoid having a dummy value in the WalRcvWakeupReason enum, so that
we can hope for the compiler to catch overlooked switch cases.
Nathan Bossart and Tom Lane
Discussion: https://postgr.es/m/20230125235004.GA1327755@nathanxps13
When auto_explain.log_verbose is on, auto_explain should print in the
logs plans equivalent to the EXPLAIN (VERBOSE). However, when
compute_query_id is on, query identifiers were not showing up, being
only handled by EXPLAIN (VERBOSE). This brings auto_explain on par with
EXPLAIN regarding that. Note that like EXPLAIN, auto_explain does not
show the query identifier when compute_query_id=regress.
The change is done so as the choice of printing the query identifier is
done in ExplainPrintPlan() rather than in ExplainOnePlan(), to avoid a
duplication of the logic dealing with the query ID. auto_explain is the
only in-core caller of ExplainPrintPlan().
While looking at the area, I have noticed that more consolidation
between EXPLAIN and auto_explain would be in order for the logging of
the plan duration and the buffer usage. This refactoring is left as a
future change.
Author: Atsushi Torikoshi
Reviewed-by: Justin Pryzby, Julien Rouhaud
Discussion: https://postgr.es/m/1ea21936981f161bccfce05765c03bee@oss.nttdata.com
If the final chunk of an oversized tuple being written out to disk was
exactly 32760 bytes, it would be corrupted due to a fencepost bug.
Bug #17619. Back-patch to 11 where the code arrived.
While testing that (see test module in archives), I (tmunro) noticed
that the per-participant page counter was not initialized to zero as it
should have been; that wasn't a live bug when it was written since DSM
memory was originally always zeroed, but since 14
min_dynamic_shared_memory might be configured and it supplies non-zeroed
memory, so that is also fixed here.
Author: Dmitry Astapov <dastapov@gmail.com>
Discussion: https://postgr.es/m/17619-0de62ceda812b8b5%40postgresql.org
VACUUM VERBOSE/autovacuuming logging have reported on the number of
pages frozen by VACUUM since commit d977ffd9 added that capability.
This information is directly related to relfrozenxid advancement, so
update an older tip from the documentation about how relfrozenxid is
reported on by the same instrumentation code. Now the tip directly
mentions newly frozen pages, too.
Eager freezing strategy avoids large build-ups of all-visible pages. It
makes VACUUM trigger page-level freezing whenever doing so will enable
the page to become all-frozen in the visibility map. This is useful for
tables that experience continual growth, particularly strict append-only
tables such as pgbench's history table. Eager freezing significantly
improves performance stability by spreading out the cost of freezing
over time, rather than doing most freezing during aggressive VACUUMs.
It complements the insert autovacuum mechanism added by commit b07642db.
VACUUM determines its freezing strategy based on the value of the new
vacuum_freeze_strategy_threshold GUC (or reloption) with logged tables.
Tables that exceed the size threshold use the eager freezing strategy.
Unlogged tables and temp tables always use eager freezing strategy,
since the added cost is negligible there. Non-permanent relations won't
incur any extra overhead in WAL written (for the obvious reason), nor in
pages dirtied (since any extra freezing will only take place on pages
whose PD_ALL_VISIBLE bit needed to be set either way).
VACUUM uses lazy freezing strategy for logged tables that fall under the
GUC size threshold. Page-level freezing triggers based on the criteria
established in commit 1de58df4, which added basic page-level freezing.
Eager freezing is strictly more aggressive than lazy freezing. Settings
like vacuum_freeze_min_age still get applied in just the same way in
every VACUUM, independent of the strategy in use. The only mechanical
difference between eager and lazy freezing strategies is that only the
former applies its own additional criteria to trigger freezing pages.
Note that even lazy freezing strategy will trigger freezing whenever a
page happens to have required that an FPI be written during pruning,
provided that the page will thereby become all-frozen in the visibility
map afterwards (due to the FPI optimization from commit 1de58df4).
The vacuum_freeze_strategy_threshold default setting is 4GB. This is a
relatively low setting that prioritizes performance stability. It will
be reviewed at the end of the Postgres 16 beta period.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
We undefined them to avoid warnings about macro redefinitions. But we haven't
fully followed the necessary include order, since at least 147c248254, in
2011. Recently the combination of the include order rules not being followed
and undefining _POSIX_C_SOURCE started to cause a compile failure, starting
with 03023a2664. Undefining _POSIX_C_SOURCE hides clock_gettime(), which is
referenced in an inline function as of 03023a2664, whereas it was a macro
before.
After seeing some evidence that undefining _POSIX_C_SOURCE et al isn't
required, I tried to build postgres with plpython on most of our supported
platforms (except DragonFlyBSD and Illumos, but similar systems were tested),
with/without the #undefines. No compiler warning / behavioral difference.
The oldest supported python version, 3.2, defines _POSIX_C_SOURCE to 200112L
ad _XOPEN_SOURCE to 600, whereas newer versions of python use 200809L/700
respectively. As _POSIX_C_SOURCE/_XOPEN_SOURCE will default to the newer
operating system on most platforms, it's possible that when using python 3.2
new warnings would be emitted - but that seems acceptable.
It's possible that this approach won't work on some older platforms. But
getting rid of most of the include-order complexity seems promising, and it's
an easily revertible patch if we end up having to go another way.
Discussion: https://postgr.es/m/20230124165814.2njc7gnvubn2amh6@awork3.anarazel.de
Until now we undefined and then redefined a lot of *printf macros due to
worries about conflicts with Python.h macro definitions. Current Python.h
doesn't define any *printf macros, and older versions just defined snprintf,
vsnprintf, guarded by #if defined(MS_WIN32) && !defined(HAVE_SNPRINTF).
Thus we can replace the undefine/define section with a single
#define HAVE_SNPRINTF 1
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20230124165814.2njc7gnvubn2amh6@awork3.anarazel.de
Invent separate macros for "invalid" values of these types, so that
we needn't embed knowledge of their representations into calling code.
These are all zeroes anyway ATM, so this is not fixing any live bug,
but it makes the code cleaner and more future-proof.
I (tgl) also chose to move DSM_HANDLE_INVALID into dsm_impl.h,
since it seems like it should live beside the typedef for dsm_handle.
Hou Zhijie, Nathan Bossart, Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/OS0PR01MB5716860B1454C34E5B179B6694C99@OS0PR01MB5716.jpnprd01.prod.outlook.com
network_ops is an opclass family of SpGiST, and the opclass able to
work on the inet type is named inet_ops.
Oversight in 7a1cd52, that reworked the design of the table listing all
the operators available.
Reported-by: Laurence Parry
Reviewed-by: Tom Lane, David G. Johnston
Discussion: https://postgr.es/m/167458110639.2667300.14741268666497110766@wrigleys.postgresql.org
Backpatch-through: 14
This rename is in preparation for the introduction of recovery modules,
where basic_wal_module will be used as a base template for the set of
callbacks introduced. The former name did not really reflect all that.
Author: Nathan Bossart
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
Modify the new event loop code from commit 7389aad6 so that it checks
for work requested by signal handlers even if it doesn't see a latch
event yet.
This gives priority to shutdown and reload requests where the latch will
be reported later in the event array, or in a later call to
WaitEventSetWait(), due to scheduling details. In particular, this
guarantees that a SIGHUP-then-connect sequence (as seen in
authentication tests) causes the postmaster to process the reload before
accepting the connection. If the WaitEventSetWait() call saw the socket
as ready, and the reload signal was generated before the connection,
then the latest time the signal handler should be able to run is after
poll/epoll_wait/kevent returns but before we check the
pending_pm_reload_request flag.
While here, also shift the handling of child exit below reload requests,
per Tom Lane's observation that that might start new processes, so we
should make sure we pick up new settings first.
This probably explains the one-off failure of build farm animal
malleefowl.
Reported-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/OS0PR01MB57163D3BF2AB42ECAA94E5C394C29%40OS0PR01MB5716.jpnprd01.prod.outlook.com
This makes two small changes that will improve pgindent's usefulness in
a git hook. First, it looks for the exclude file relative to the current
directory. And second, it applies the filters to filenames given on the
command line as well as those found in a directory sweep.
It might prove necessary to make further efforts to find the exclude
file, and even to allow multiple exclude files, but for now this should
be enough for most purposes.
Reviewed by Jelte Fennema
Previously, a CREATEROLE user without SUPERUSER could not alter
REPLICATION users in any way, and could not set the BYPASSRLS
attribute. However, they could manipulate the CREATEDB property
even if they themselves did not possess it.
With this change, a CREATEROLE user without SUPERUSER can set or
clear the REPLICATION, BYPASSRLS, or CREATEDB property on a new
role or a role that they have rights to manage if and only if
that property is set for their own role.
This implements the standard idea that you can't give permissions
you don't have (but you can give the ones you do have). We might
in the future want to provide more powerful ways to constrain
what a CREATEROLE user can do - for example, to limit whether
CONNECTION LIMIT can be set or the values to which it can be set -
but that is left as future work.
Patch by me, reviewed by Nathan Bossart, Tushar Ahuja, and Neha
Sharma.
Discussion: http://postgr.es/m/CA+TgmobX=LHg_J5aT=0pi9gJy=JdtrUVGAu0zhr-i5v5nNbJDg@mail.gmail.com
The drop database command waits for the logical replication sync worker to
accept ProcSignalBarrier and the worker's slot creation waits for the drop
database to finish which leads to a deadlock. This happens because the
tablesync worker holds interrupts while creating a slot.
We prevent cancel/die interrupts while creating a slot in the table sync
worker because it is possible that before the server finishes this
command, a concurrent drop subscription happens which would complete
without removing this slot and that leads to the slot existing until the
end of walsender. However, the slot will eventually get dropped at the
walsender exit time, so there is no danger of the dangling slot.
This patch reallows cancel/die interrupts while creating a slot and
modifies the test to wait for slots to become zero to prevent finding an
ephemeral slot.
The reported hang doesn't happen in PG14 as the drop database starts to
wait for ProcSignalBarrier with PG15 (commits 4eb2176318 and e2f65f4255)
but it is good to backpatch this till PG14 as it is not a good idea to
prevent interrupts during a network call that could block indefinitely.
Reported-by: Lakshmi Narayanan Sreethar
Diagnosed-by: Andres Freund
Author: Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 14, where it was introduced in commit 6b67d72b60
Discussion: https://postgr.es/m/CA+kvmZELXQ4ZD3U=XCXuG3KvFgkuPoN1QrEj8c-rMRodrLOnsg@mail.gmail.com
In contrast to the changes to dblink and postgres_fdw, this does not fix a
bug, as libpqwalreceiver did already process interrupts.
Besides reducing code duplication, the conversion leads to libpqwalreceiver
now using reserving file descriptors for libpq connections. While not strictly
required for the use in walreceiver, we are also using libpqwalreceiver for
logical replication, where it does seem more important.
Even if we eventually decide to backpatch the prior commits, there'd be no
need to backpatch this commit, due to not fixing an active bug.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
Until now dblink and postgres_fdw did not process interrupts during connection
establishment. Besides preventing query cancellations etc, this can lead to
undetected deadlocks, as global barriers are not processed.
These aforementioned undetected deadlocks are the reason for the spate of CI
test failures in the FreeBSD 'test_running' step.
Fix the bug by using the helper from libpq-be-fe-helpers.h, introduced in a
prior commit. Besides fixing the bug, this also removes duplicated code
around reserving file descriptors.
As the change is relatively large and there are no field reports of the
problem, don't backpatch for now.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
Backpatch:
Currently dblink and postgres_fdw don't process interrupts during connection
establishment. Besides preventing query cancellations etc, this can lead to
undetected deadlocks, as global barriers are not processed.
Libpqwalreceiver in contrast, processes interrupts during connection
establishment. The required code is not trivial, so duplicating it into
additional places does not seem like a good option.
These aforementioned undetected deadlocks are the reason for the spate of CI
test failures in the FreeBSD 'test_running' step.
For now the helper library is just a header, as it needs to be linked into
each extension using libpq, and it seems too small to be worth adding a
dedicated static library for.
The conversion to the helper are done in subsequent commits.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
When libpqrcv_connect (also known as walrcv_connect()) failed, it leaked the
libpq connection. In most paths that's fairly harmless, as the calling process
will exit soon after. But e.g. CREATE SUBSCRIPTION could lead to a somewhat
longer lived leak.
Fix by releasing resources, including the libpq connection, on error.
Add a test exercising the error code path. To make it reliable and safe, the
test tries to connect to port=-1, which happens to fail during connection
establishment, rather than during connection string parsing.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20230121011237.q52apbvlarfv6jm6@awork3.anarazel.de
Backpatch: 11-
b762fed64 recently changed this test to prevent subquery pullup to allow
us to test Memoize with lateral_vars. As pointed out by Tom Lane, OFFSET
0 is our standard way of preventing subquery pullups, so do it that way
instead.
Discussion: https://postgr.es/m/2144818.1674517061@sss.pgh.pa.us
Backpatch-through: 14, same as b762fed64
The test in question was meant to be testing Memoize to ensure it worked
correctly when the inner side of the join contained lateral vars, however,
nothing in the lateral subquery stopped it from being pulled up into the
main query, so the planner did that, and that meant no more lateral vars.
Here we add a simple ORDER BY to stop the planner from being able to
pullup the lateral subquery.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_LHJaN4L-tXpKMiPFnsCJWU1P8Xh59o0W7AA6UN99=cQ@mail.gmail.com
Backpatch-through: 14, where Memoize was added.
7fcbf6a and 2ff6555 changed the function signature of XLogPageRead()
but did not update the comment.
XLogReaderRoutine contains up to date information about the API, so no
need to repeat all that at XLogPageRead(), but fix the mentions of the
no longer existing function arguments.
This enhances the numeric type input function, adding support for
hexadecimal, octal, and binary integers of any size, up to the limits
of the numeric type.
Since 6fcda9aba8, such non-decimal integers have been accepted by the
parser as integer literals and passed through to numeric_in(). This
commit gives numeric_in() the ability to handle them.
While at it, simplify the handling of NaN and infinities, reducing the
number of calls to pg_strncasecmp(), and arrange for pg_strncasecmp()
to not be called at all for regular numbers. This gives a significant
performance improvement for decimal inputs, more than offsetting the
small performance hit of checking for non-decimal input.
Discussion: https://postgr.es/m/CAEZATCV8XShnmT9HZy25C%2Bo78CVOFmUN5EM9FRAZ5xvYTggPMg%40mail.gmail.com
At least on my machine, the initial coding of this didn't actually
work, because interpolation of "$post_fh->filename" doesn't act
as intended.
I threw in some double quotes too, just in case anybody tries
to run this in a path containing spaces.
Historically we skipped writing/reading this field, but that no
longer works under WRITE_READ_PARSE_PLAN_TREES since we expanded
the coverage of that option to include utility commands (787102b56).
Remove the special case and just treat this field normally.
Bump catversion out of an abundance of caution --- I do not think
we currently ever store RangeVar nodes in the catalogs, but
perhaps I'm wrong.
Per report from Pavel Stehule.
Discussion: https://postgr.es/m/CAFj8pRAYvYu-qU7-NieqRRyaQZk-yr3UjtHQ2LR62PS9M1dZMA@mail.gmail.com
This adds two modes of running pgindent, neither of which results in
any changes being made to the source code. The --show-diff option shows
what changes would have been made, and the --silent-diff option just
exits with a status of 2 if any changes would be made. The second of
these is intended for scripting use in places such as git hooks.
Along the way some code cleanup is done, and a --help option is also
added.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/c9c9fa6d-6de6-48c2-4f8b-0fbeef026439@dunslane.net
An upcoming patch by Melanie Plageman does some refactoring work in this
area. Run pgindent on that file now before making any changes so that
it's easier to maintain/evolve each of the individual patches doing the
refactor work. Additionally, add a few new required typedefs to the list
to make it easier to do future pgindent runs on this file during the
refactor work.
Discussion: https://postgr.es/m/CAAKRu_YSOnhKsDyFcqJsKtBSrd32DP-jjXmv7hL0BPD-z0TGXQ@mail.gmail.com
Commit c4649cce39 removed the "shared" and "ntapes" arguments, but the
comment still talked about "shared". It also talked about "a shared
file handle", which was technically correct because even before commit
c4649cce39, the "shared file handle" referred to the "fileset"
argument, not "shared". But it was very confusing. Improve the
comment.
Also add a comment on what the "preallocate" argument does.
Backpatch to v15, just to make backpatching other patches easier in
the future.
Discussion: https://www.postgresql.org/message-id/af989685-91d5-aad4-8f60-1d066b5ec309@enterprisedb.com
Reviewed-by: Peter Eisentraut
Per buildfarm member mandrill, it seems that
max_parallel_workers_per_gather may not always be set to the default value
of 2 when the new test added in 16fd03e95 is executed. Here let's just
explicitly set that to 2 so that the planner never opts to use more than
that many parallel workers.
This function is able to extract the full page images from a range of
records, specified as of input arguments start_lsn and end_lsn. Like
the other functions of this module, an error is returned if using LSNs
that do not reflect real system values. All the FPIs stored in a single
record are extracted.
The module's version is bumped to 1.1.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/CALj2ACVCcvzd7WiWvD=6_7NBvVB_r6G0EGSxL4F8vosAi6Se4g@mail.gmail.com
Dean Rasheed