It has been reported that PL/Tcl built on macOS with GCC >=11 crashes.
The reason is that there is a hash_search() function in the operating
system's libraries, and that ends up being called instead of the one
in postgres. This has something to do with how the linker resolves
references between the various possibilities it has been given, and
somehow something changed that it is now picking that one in this
configuration.
We found that removing the -lc from the link command line fixes this
problem. The -lc was introduced a long time ago in commit
e3909672f1, and we think the reasons
might be obsolete, so we decided that we'll try to just remove it and
see if any problems arise.
Discussion: https://www.postgresql.org/message-id/flat/a78c847a-4f79-9286-be99-e819e9e4139e%40enterprisedb.com
When rebuilding the relation mapping on subscribers, we were not releasing
the attribute mapping's memory which was no longer required.
The attribute mapping used in logical tuple conversion was refactored in
PG13 (by commit e1551f96e6) but we forgot to update the related code that
frees the attribute map.
Author: Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila, Shi yu
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
072132f0 used the attnum offset to access the raw_fields array when
checking that the attribute names of the header and of the relation
match, leading to incorrect results or even crashes if the attribute
numbers of a relation are changed, like on a dropped attribute. This
fixes the logic to use the correct attribute names for the header
matching requirements.
Also, this commit disallows HEADER MATCH in COPY TO as there is no
validation that can be done in this case.
The tests are expanded for HEADER MATCH with COPY FROM and dropped
columns, with cases where a relation has a dropped and re-added column,
as well as a reduced set of columns.
Author: Julien Rouhaud
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/20220607154744.vvmitnqhyxrne5ms@jrouhaud
The macro is being applied to a TOAST pointer, not a varlena header.
Therefore the use of VARATT_IS_COMPRESSED() is wrong. We can check
VARATT_EXTERNAL_IS_COMPRESSED(), but then we don't need the length
check that follows.
Report and fix by Kyotaro Horiguchi.
Discussion: http://postgr.es/m/20220517.162719.1671558681467343711.horikyota.ntt@gmail.com
Second thoughts about 9cd43f6cb: given that we're staying bug-compatible
with the old behavior of using double not single quotes for extension
versions, we can simplify this completion code by pretending that
extension versions *are* identifiers, and not using VERBATIM. Then
_complete_from_query() will think that the query results are identifiers
in need of quoting, and we end up with the same behavior as before.
This doesn't work for Query_for_list_of_available_extension_versions_with_TO,
but let's just drop that: there is no other place where we handle
multi-keyword phrases that way, and it doesn't seem very desirable here
either. Handle completion of "UPDATE TO" in our more usual pattern.
Discussion: https://postgr.es/m/CAMkU=1yV+egSYrzWvbDY8VZ6bKEMrKbzxr-HTuiHi+wDgSUMgA@mail.gmail.com
We build the partition map entries on subscribers while applying the
changes for update/delete on partitions. The component relation in each
entry is closed after its use so we need to update it on successive use of
cache entries.
This problem was there since the original commit f1ac27bfda that
introduced this code but we didn't notice it till the recent commit
26b3455afa started to use the component relation of partition map cache
entry.
Reported-by: Tom Lane, as per buildfarm
Author: Amit Langote, Hou Zhijie
Reviewed-by: Amit Kapila, Shi Yu
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
In logical replication, we will check if the target table on the
subscriber is updatable by comparing the replica identity of the table on
the publisher with the table on the subscriber. When the target table is a
partitioned table, we only check its replica identity but not for the
partition tables. This leads to assertion failure while applying changes
for update/delete as we expect those to succeed only when the
corresponding partition table has a primary key or has a replica
identity defined.
Fix it by checking the replica identity of the partition table while
applying changes.
Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
In 02b8048ba I (tgl) got rid of the need for most tab-completion queries
to return pre-quoted identifiers. But I over-hastily removed the
quote_ident call from Query_for_list_of_available_extension_versions*
too; those still need it, because what is returned isn't an identifier
at all and will (almost?) always need quoting.
Arguably we should use quote_literal here instead. But quote_ident
works too and people may be used to that behavior, so stick with it.
In passing, fix inconsistent omission of schema-qualification in
Query_for_list_of_encodings. That's not a security issue per our
current guidelines, but it ought to be like the rest.
Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1yV+egSYrzWvbDY8VZ6bKEMrKbzxr-HTuiHi+wDgSUMgA@mail.gmail.com
Three parameters have been using "int" rather than "integer" to describe
their type:
auth_delay.milliseconds
max_logical_replication_workers
pg_prewarm.autoprewarm_interval
This is inconsistent with any other integer GUCs listed in the docs
(148, as far as I can see).
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv6X5T-veN2abUDUvBxZm+SSm-9otfi3LZPGyOc6u6hiA@mail.gmail.com
This reverts commits 5753d4ee32 and fe60b67250 that modified HOT to
ignore BRIN indexes. The commit message for 5753d4ee32 claims that:
When determining whether an index update may be skipped by using
HOT, we can ignore attributes indexed only by BRIN indexes. There
are no index pointers to individual tuples in BRIN, and the page
range summary will be updated anyway as it relies on visibility
info.
This is partially incorrect - it's true BRIN indexes don't point to
individual tuples, so HOT chains are not an issue, but the visibitlity
info is not sufficient to keep the index up to date. This can easily
result in corrupted indexes, as demonstrated in the hackers thread.
This does not mean relaxing the HOT restrictions for BRIN is a lost
cause, but it needs to handle the two aspects (allowing HOT chains and
updating the page range summaries) as separate. But that requires a
major changes, and it's too late for that in the current dev cycle.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
We were not updating the partition map cache in the subscriber even when
the corresponding remote rel is changed. Due to this data was getting
incorrectly replicated for partition tables after the publisher has
changed the table schema.
Fix it by resetting the required entries in the partition map cache after
receiving a new relation mapping from the publisher.
Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
In addition, this moves the new paragraph in the MVCC page upwards, for
a more consistent flow; some minor markup mistakes, style issues and
typos are fixed too.
Per comments from Justin Pryzby.
Discussion: https://postgr.es/m/20220511163350.GL19626@telsasoft.com
This reverts the changes to pg_upgrade's Makefile and .gitignore done in
15b6d21. The TAP tests run in isolation, executing pg_upgrade in
tmp_check/ in the build directory so as any files created in the
execution path (reindex_hash.sql and delete_old_cluster.{sh,bat}) are
never in the tree, so entries are not necessary in this case. However,
not having these impacts the cleanliness of the code tree when running
./pg_upgrade directly from src/bin/pg_upgrade/.
This commit adds back to .gitignore all the files generated in the
execution path, and the Makefile rule to clean them up if they exist.
Per gripe from Tom Lane.
Discussion: https://postgr.es/m/90595.1655227384@sss.pgh.pa.us
While building a new attrmap which maps partition attribute numbers to
remoterel's, we incorrectly update the map for dropped column attributes.
Later, it caused cache look-up failure when we tried to use the map to
fetch the information about attributes.
This also fixes the partition map cache invalidation which was using the
wrong type cast to fetch the entry. We were using stale partition map
entry after invalidation which leads to the assertion or cache look-up
failure.
Reported-by: Shi Yu
Author: Hou Zhijie, Shi Yu
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
This commit, in completion of 157f873, forces a ROLLBACK for
--single-transaction only when ON_ERROR_STOP is used when one of the
steps defined by -f/-c fails. Hence, COMMIT is always used when
ON_ERROR_STOP is not set, ignoring the status code of the last action
taken in the set of switches specified by -c/-f (previously ROLLBACK
would have been issued even without ON_ERROR_STOP if the last step
failed, while COMMIT was issued if a step in-between failed as long as
the last step succeeded, leading to more inconsistency).
While on it, this adds much more test coverage in this area when not
using ON_ERROR_STOP with multiple switch patterns involving -c and -f
for query files, single queries and slash commands.
The behavior of ON_ERROR_STOP is arguably a bug, but there was no much
support for a backpatch to force a ROLLBACK on a step failure, so this
change is done only on HEAD for now.
Per discussion with Tom Lane and Kyotaro Horiguchi.
Discussion: https://postgr.es/m/Yqbc8bAdwnP02na4@paquier.xyz
If an application executed operations like EXEC SQL PREPARE
without having first established a database connection, it could
get a core dump instead of the expected clean failure. This
occurred because we did "pthread_getspecific(actual_connection_key)"
without ever having initialized the TSD key actual_connection_key.
The results of that are probably platform-specific, but at least
on Linux it often leads to a crash.
To fix, add calls to ecpg_pthreads_init() in the code paths that
might use actual_connection_key uninitialized. It's harmless
(and hopefully inexpensive) to do that more than once.
Per bug #17514 from Okano Naoki. The problem's ancient, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/17514-edd4fad547c5692c@postgresql.org
The previous wording was "the underlying data type's default collation
is used", which is wrong or at least misleading. The domain inherits
the base type's collation behavior, which if "default" actually can
mean that we use some non-default collation obtained from elsewhere.
Per complaint from Jian He.
Discussion: https://postgr.es/m/CACJufxHMR8_4WooDPjjvEdaxB2hQ5a49qthci8fpKP0MKemVRQ@mail.gmail.com
Use the same error message for all cases of pathname overrun,
since users aren't going to much care which one was too long.
Add missing newline to said error (as pg_upgrade's version
of pg_fatal requires that).
Add pathname overrun checks for the individual log files,
not just the directories.
Remove initial newline in log files; the new scheme here
guarantees that we'll never be appending to an old file.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/20220613.120551.729848632120189555.horikyota.ntt@gmail.com
Recent additions to the subscription tests check for log entries, but
fail to account for the possible presence of an SQL errror code, which
happens if log_error_verbosity is set to 'verbose'. Add this into the
regular expressions that are checked for.
In commit ec62cb0aa, I foolishly replaced ExecEvalWholeRowVar's
lookup_rowtype_tupdesc_domain call with just lookup_rowtype_tupdesc,
because I didn't see how a domain could be involved there, and
there were no regression test cases to jog my memory. But the
existing code was correct, so revert that change and add a test
case showing why it's necessary. (Note: per comment in struct
DatumTupleFields, it is correct to produce an output tuple that's
labeled with the base composite type, not the domain; hence just
blindly looking through the domain is correct here.)
Per bug #17515 from Dan Kubb. Back-patch to v11 where domains over
composites became a thing.
Discussion: https://postgr.es/m/17515-a24737438363aca0@postgresql.org
This function can be called from mark_async_capable_plan(), a helper
function for create_append_plan(), before set_subqueryscan_references(),
to determine the triviality of a SubqueryScan that is a child of an
Append plan node, which is done before doing finalize_plan() on the
SubqueryScan (if necessary) and set_plan_references() on the subplan,
unlike when called from set_subqueryscan_references(). The reason why
this is safe wouldn't be that obvious, so add comments explaining this.
Follow-up for commit c2bb02bc2.
Reviewed by Zhihong Yu.
Discussion: https://postgr.es/m/CAPmGK17%2BGiJBthC6va7%2B9n6t75e-M1N0U18YB2G1B%2BE5OdrNTA%40mail.gmail.com
The new show-all-results feature in psql (7844c9918) went out of its
way to show notices next to the results of the statements (in a
multi-statement string) that caused them. This also had the
consequence that notices for a single statement were not shown until
after the statement had executed, instead of right away. After some
discussion, it seems very difficult to satisfy both of these goals, so
here we are giving up on the first goal and just show the notices as
we get them. This restores the pre-7844c9918 behavior for notices.
Reported-by: Alastair McKinley <a.mckinley@analyticsengines.com>
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/PAXPR02MB760039506C87A2083AD85575E3DA9%40PAXPR02MB7600.eurprd02.prod.outlook.com
The original advice for hard-wired SetConfigOption calls was to use
PGC_S_OVERRIDE, particularly for PGC_INTERNAL GUCs. However,
that's really overkill for PGC_INTERNAL GUCs, since there is no
possibility that we need to override a user-provided setting.
Instead use PGC_S_DYNAMIC_DEFAULT in most places, so that the
value will appear with source = 'default' in pg_settings and thereby
not be shown by psql's new \dconfig command. The one exception is
that when changing in_hot_standby in a hot-standby session, we still
use PGC_S_OVERRIDE, because people felt that seeing that in \dconfig
would be a good thing.
Similarly use PGC_S_DYNAMIC_DEFAULT for the auto-tune value of
wal_buffers (if possible, that is if wal_buffers wasn't explicitly
set to -1), and for the typical 2MB value of max_stack_depth.
In combination these changes remove four not-very-interesting
entries from the typical output of \dconfig, all of which people
fingered as "why is that showing up?" in the discussion thread.
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
The patch introducing jsonpath dropped a para about that between
two related examples, and didn't bother updating the introductory
sentences that it falsified. The grammar was pretty shaky as well.
Some locales use a comma as decimal separator (like Czech or French),
and psql's 001_basic.pl for \timing was not able to handle that
properly. This fixes the matching regexes to be able to handle both
comma and dot as possible decimal separators, as per a suggestion from
Andrew Dunstan.
psql tests were the only place with such a portability issue
(check-world passed here with a forced LANG/LANGUAGE). These tests are
new as of c0280bc, so there is no need for a backpatch.
Reported-by: Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRBz8iQmd2aOaCLvO-rJY6vZr-h6Q0qvV0J+yb78J7uiaA@mail.gmail.com
38bfae3 has moved the contents written to files by pg_upgrade under a
new directory called pg_upgrade_output.d/ located in the new cluster's
data folder, and it used a simple structure made of two subdirectories
leading to a fixed structure: log/ and dump/. This design has made
weaker pg_upgrade on repeated calls, as we could get failures when
creating one or more of those directories, while potentially losing the
logs of a previous run (logs are retained automatically on failure, and
cleaned up on success unless --retain is specified). So a user would
need to clean up pg_upgrade_output.d/ as an extra step for any repeated
calls of pg_upgrade. The most common scenario here is --check followed
by the actual upgrade, but one could see a failure when specifying an
incorrect input argument value. Removing entirely the logs would have
the disadvantage of removing all the past information, even if --retain
was specified at some past step.
This result is annoying for a lot of users and automated upgrade flows.
So, rather than requiring a manual removal of pg_upgrade_output.d/, this
redesigns the set of output directories in a more dynamic way, based on
a suggestion from Tom Lane and Daniel Gustafsson. pg_upgrade_output.d/
is still the base path, but a second directory level is added, mostly
named after an ISO-8601-formatted timestamp (in short human-readable,
with milliseconds appended to the name to avoid any conflicts). The
logs and dumps are saved within the same subdirectories as previously,
as of log/ and dump/, but these are located inside the subdirectory
named after the timestamp.
The logs of a given run are removed only after a successful run if
--retain is not used, and pg_upgrade_output.d/ is kept if there are any
logs from a previous run. Note that previously, pg_upgrade would have
kept the logs even after a successful --check but that was inconsistent
compared to the case without --check when using --retain. The code in
charge of the removal of the output directories is now refactored into a
single routine.
Two TAP tests are added with some --check commands (one failure case and
one success case), to look after the issue fixed here. Note that the
tests had to be tweaked a bit to fit with the new directory structure so
as it can find any logs generated on failure. This is still going to
require a change in the buildfarm client for the case where pg_upgrade
is tested without the TAP test, though, but I'll tackle that with a
separate patch where needed.
Reported-by: Tushar Ahuja
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Justin Pryzby
Discussion: https://postgr.es/m/77e6ecaa-2785-97aa-f229-4b6e047cbd2b@enterprisedb.com
Bug #17512 highlighted that a suitably broken data type could cause the
backend to crash if either the hash function or equality function were in
someway non-deterministic based on their input values. Such a data type
could cause a crash of the backend due to some code which assumes that
we'll always find a hash table entry corresponding to an item in the
Memoize LRU list.
Here we remove the assumption that we'll always find the entry
corresponding to the given LRU list item and add run-time checks to verify
we have found the given item in the cache.
This is not a fix for bug #17512, but it will turn the crash reported by
that bug report into an internal ERROR.
Reported-by: Ales Zeleny
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvpxFSTwvoYWT7kmFVSZ9zLAeHb=S9vrz=RExMgSkQNWqw@mail.gmail.com
Backpatch-through: 14, where Memoize was added.
pg_stat_get_subscription scanned one more LogicalRepWorker array entry
than is really allocated. In the worst case this could lead to SIGSEGV,
if the LogicalRepCtx data structure is near the end of shared memory.
That seems quite unlikely though (thanks to the ordering of calls in
CreateSharedMemoryAndSemaphores) and we've heard no field reports of it.
A more likely misbehavior is one row of garbage data in the function's
result, but even that is not real likely because of the check that the
pid field matches some live backend.
Report and fix by Kuntal Ghosh. This bug is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJykEDzW6jQK6Yz7Qh_PMtD=95de_7QoocbVR2Qy8hWZA@mail.gmail.com
An error PGresult generated by libpq itself, such as a report of
connection loss, won't have broken-down error fields.
should_processing_continue() blithely assumed that
PG_DIAG_SEVERITY_NONLOCALIZED would always be present, and would
dump core if it wasn't.
Per grepping to see if 6d157e7cb's mistake was repeated elsewhere.
An error PGresult generated by libpq itself, such as a report of
connection loss, won't have broken-down error fields.
ecpg_raise_backend() blithely assumed that PG_DIAG_MESSAGE_PRIMARY
would always be present, and would end up passing a NULL string
pointer to snprintf when it isn't. That would typically crash
before 3779ac62d, and it would fail to provide a useful error report
in any case. Best practice is to substitute PQerrorMessage(conn)
in such cases, so do that.
Per bug #17421 from Masayuki Hirose. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17421-790ff887e3188874@postgresql.org
psql --single-transaction is able to handle multiple -c and -f switches
in a single transaction since d5563d7d, but this had the surprising
behavior of forcing a transaction COMMIT even if psql failed with an
error in the client (for example incorrect path given to \copy), which
would generate an error, but still commit any changes that were already
applied in the backend. This commit makes the behavior more consistent,
by enforcing a transaction ROLLBACK if any commands fail, both
client-side and backend-side, so as no changes are applied if one error
happens in any of them.
Some tests are added on HEAD to provide some coverage about all that.
Backend-side errors are unreliable as IPC::Run can complain on SIGPIPE
if psql quits before reading a query result, but that should work
properly in the case where any errors come from psql itself, which is
what the original report is about.
Reported-by: Christoph Berg
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
Backpatch-through: 10
The hard-wired PageOutput arguments in usage() and sibling functions
have been a perennial maintenance gotcha, and there's no reason to
think we'll ever get any better about that. Let's get rid of those
magic constants by constructing the output in a buffer where we can
count the newlines before calling PageOutput. (Perhaps this is
microscopically slower; but none of these functions are performance
critical, and anyway we might well be buying back all the cost by
avoiding having to pass most of the data through snprintf.c. I could
not detect any speed difference in a desultory check.) This also
gets rid of the need to assume that platform-specific variations in
the output are insignificant.
While at it, make the code shorter and more abstract by inventing
helper macros HELP0() and HELPN() to encapsulate the specific
output actions being invoked.
Discussion: https://postgr.es/m/365160.1654289490@sss.pgh.pa.us
TAP tests are run from their own directory in the source tree, and in a
VPATH build the execution of the pg_upgrade command was leaving behind a
file in the source tree, that should be left untouched. In order to
avoid this issue, the test moves to PostgreSQL::Test::Utils::tmp_check,
so as any files generated by pg_upgrade do not impact the source tree,
but the build tree. This has as nice side-effect to make unnessary the
presence of such files in pg_upgrade's .gitignore and Makefile. This
strategy is similar to psql's test 010_tab_completion.pl, though the
reasons behind this choice are different.
In passing, fix one misleading test name that was added by 99f6f19.
Per discussion with Peter Eisentraut, Andrew Dunstan, Tom Lane, Andres
Freund and myself.
Discussion: https://postgr.es/m/f80ace33-11fb-1cd3-20f8-98f51d151088@enterprisedb.com
Peter Eisentraut