Must hold some lock on the pg_statistic_ext_data catalog *before*
we look up the tuple we aim to replace. Otherwise a concurrent
VACUUM FULL or similar operation could move it to a different TID,
leaving us trying to replace the wrong tuple.
Back-patch to v12 where this got broken.
Credit goes to Dean Rasheed; I'm just doing the clerical work.
Discussion: https://postgr.es/m/CAEZATCU0zHMDiQV0g8P2U+YSP9C1idUPrn79DajsbonwkN0xvQ@mail.gmail.com
The stats_ext test is not expecting that autovacuum will touch
any of its tables; an expectation falsified by commit b07642dbc.
Although I'm suspicious that there's something else going on that
makes extended stats estimates not 100% reproducible, it's pretty
easy to demonstrate that there are places in this test that fail
if an autovacuum updates the table's stats unexpectedly.
Hence, revert the band-aid changes made by 2dc16efed and 24566b359
in favor of summarily disabling autovacuum for all the tables that
this test checks estimated rowcounts for.
Also remove an evidently obsolete comment at the head of the test.
Discussion: https://postgr.es/m/15012.1585623298@sss.pgh.pa.us
When recovery target is reached and recovery is paused because of
recovery_target_action=pause, executing pg_wal_replay_resume() causes
the standby to promote, i.e., the recovery to end. So, in this case,
the previous message "Execute pg_wal_replay_resume() to continue"
logged was confusing because pg_wal_replay_resume() doesn't cause
the recovery to continue.
This commit improves the message logged when recovery is paused,
and the proper message is output based on what (pg_wal_replay_pause
or recovery_target_action) causes recovery to be paused.
Author: Sergei Kornilov, revised by Fujii Masao
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/19168211580382043@myt5-b646bde4b8f3.qloud-c.yandex.net
Buildfarm experience shows that this function can fail with ENOENT
if some other process unlinks a file between when we read the directory
entry and when we try to stat() it. The problem is old but we had
not noticed it until 085b6b667 added regression test coverage.
To fix, just ignore ENOENT failures. There is one other case that
this might hide: a symlink that points to nowhere. That seems okay
though, at least better than erroring.
Back-patch to v10 where this function was added, since the regression
test cases were too.
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
The existing implementation of the ltree ~ lquery match operator is
sufficiently complex and undocumented that it's hard to tell exactly
what it does. But one thing it clearly gets wrong is the combination
of NOT symbols (!) and '*' symbols. A pattern such as '*.!foo.*'
should, by any ordinary understanding of regular expression behavior,
match any ltree that has at least one label that's not "foo". As best
we can tell by experimentation, what it's actually matching is any
ltree in which *no* label is "foo". That's surprising, and not at all
what the documentation says.
Now, that's arguably a useful behavior, so if we rewrite to fix the
bug we should provide some other way to get it. To do so, add the
ability to attach lquery quantifiers to non-'*' items as well as '*'s.
Then the pattern '!foo{,}' expresses "any ltree in which no label is
foo". For backwards compatibility, the default quantifier for non-'*'
items has to be "{1}", although the default for '*' items is '{,}'.
I wouldn't have done it like that in a green field, but it's not
totally horrible.
Armed with that, rewrite checkCond() from scratch. Treating '*' and
non-'*' items alike makes it simpler, not more complicated, so that
the function actually gets a lot shorter than it was.
Filip Rembiałkowski, Tom Lane, Nikita Glukhov, per a very
ancient bug report from M. Palm
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
Ensure that the type name is mentioned in all cases (bare "syntax error"
isn't that helpful). Avoid using the term "level", since that's not
used in the documentation. Phrase error position reports as "at
character N" not "in position N"; the latter seems ambiguous, and it's
certainly not how we say it elsewhere. For the same reason, make the
character position values be 1-based not 0-based. Provide a position
in more cases. (I continued to leave that out of messages complaining
about end-of-input, where it seemed pointless, as well as messages
complaining about overall input complexity, where fingering any one part
of the input would be arbitrary.)
Discussion: https://postgr.es/m/15582.1585529626@sss.pgh.pa.us
This commit improves error reporting introduced by 911e702077. It puts
argument of errmsg() to the single line for easier grepping source for error
text. Also it improves wording of errhint().
The original implementation disallowed using OVERRIDING USER VALUE on
identity columns defined as GENERATED ALWAYS, which is not per
standard. So allow that now.
Expand documentation and tests around this.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://www.postgresql.org/message-id/flat/CAEZATCVrh2ufCwmzzM%3Dk_OfuLhTTPBJCdFkimst2kry4oHepuQ%40mail.gmail.com
The definitions of the routines defined in xlogarchive.c have been part
of xlog_internal.h which is included by several frontend tools, but all
those routines are only called by the backend. More cleanup could be
done within xlog_internal.h, but that's already a nice cut.
This will help a follow-up patch for pg_rewind where handling of
restore_command is added for frontends.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Álvaro Herrera, Alexander Korotkov
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
vacuum code.
After commit b61d161c14, during vacuum, we cache the information of
relation name and relation namespace in local structure LVRelStats so that
we can use it in an error callback function. We can use the cached
information to avoid the calls to RelationGetRelationName(),
RelationGetNamespace() and get_namespace_name(). This is mainly for the
consistent in vacuum code path but it will avoid the extra syscache lookup
we do in get_namespace_name().
Author: Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://www.postgresql.org/message-id/20191120210600.GC30362@telsasoft.com
Commit 7c2dbc69 reorganized _bt_truncate() in a way that enables a
further simplification that I (pgeoghegan) missed: Since we mark the
tuple that is returned to the caller as a pivot tuple before the point
where its heap TID is set as of 7c2dbc69, it is possible to use the high
level BTreeTupleGetHeapTID() inline function to get an item pointer. Do
it that way now. This approach is clearer and more maintainable.
This reverts commit 2aa6e33, that added a fast path to skip
anti-wraparound and non-aggressive autovacuum jobs (these have no sense
as anti-wraparound implies aggressive). With a cluster using a high
amount of relations with a portion of them being heavily updated, this
could cause autovacuum to lock down, with autovacuum workers attempting
repeatedly those jobs on the same relations for the same database, that
just kept being skipped. This lock down can be solved with a manual
VACUUM FREEZE.
Justin King has reported one environment where the issue happened, and
Julien Rouhaud and I have been able to reproduce it in a second
environment. With a very aggressive autovacuum_freeze_max_age,
triggering those jobs with pgbench is a matter of minutes, and hitting
the lock down is a lot harder (my local tests failed to do that).
Note that anti-wraparound and non-aggressive jobs can only be triggered
on a subset of shared catalogs:
- pg_auth_members
- pg_authid
- pg_database
- pg_replication_origin
- pg_shseclabel
- pg_subscription
- pg_tablespace
While the lock down was possible down to v12, the root cause of those
jobs is a much older issue, which needs more analysis.
Bonus thanks to Andres Freund for the discussion.
Reported-by: Justin King
Discussion: https://postgr.es/m/CAE39h22zPLrkH17GrkDgAYL3kbjvySYD1io+rtnAUFnaJJVS4g@mail.gmail.com
Backpatch-through: 12
Simplify _bt_truncate(), the routine that generates truncated leaf page
high keys. Remove a micro-optimization that avoided a second palloc0()
call (this was used when a heap TID was needed in the final pivot tuple,
though only when the index happened to not be an INCLUDE index).
Removing this dubious micro-optimization allows _bt_truncate() to use
the index_truncate_tuple() indextuple.c utility routine in all cases.
This was already the common case.
This commit is a HEAD-only follow up to bugfix commit 4b42a899.
The recheck isn't needed anymore, as RelationGetBufferForTuple() now
extends the relation with RBM_ZERO_AND_LOCK. Previously we needed to
handle the fact that relation extension extended the relation and then
separately acquired a lock on the page - while expecting that the page
is empty.
Reported-By: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQArA_=J0D5T258xsCY6Xtf6wiH4b=QDPDgVS+WZUN10WDw@mail.gmail.com
Early versions of opclass options patch uses zero support procedure as opclass
options procedure. This commit removes rudiments of it, which were committed
in 911e702077. Also, it implements correct handling of amoptsprocnum == 0.
INCLUDE indexes failed to have their non-key attributes physically
truncated away in certain rare cases. This led to physically larger
pivot tuples that contained useless non-key attribute values. The
impact on users should be negligible, but this is still clearly a
regression (Postgres 11 supports INCLUDE indexes, and yet was not
affected).
The bug appeared in commit dd299df8, which introduced "true" suffix
truncation of key attributes.
Discussion: https://postgr.es/m/CAH2-Wz=E8pkV9ivRSFHtv812H5ckf8s1-yhx61_WrJbKccGcrQ@mail.gmail.com
Backpatch: 12-, where "true" suffix truncation was introduced.
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
The test suites currently don't use Unix-domain sockets on Windows.
This optionally allows enabling that by setting the environment
variable PG_TEST_USE_UNIX_SOCKETS.
This should currently be considered experimental. In particular,
pg_regress.c contains some comments that the cleanup code for
Unix-domain sockets doesn't work correctly under Windows, which hasn't
been an problem until now. But it's good enough for locally
supervised testing of the functionality.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/54bde68c-d134-4eb8-5bd3-8af33b72a010@2ndquadrant.com
GetLocaleInfoEx() can fail on strings that setlocale() was perfectly
happy with. A common way for that to happen is if the locale string
is actually a Unix-style string, say "et_EE.UTF-8". In that case,
what's after the dot is an encoding name, not a Windows codepage number;
blindly treating it as a codepage number led to failure, with a fairly
silly error message. Hence, check to see if what's after the dot is
all digits, and if not, treat it as a literal encoding name rather than
a codepage number. This will do the right thing with many Unix-style
locale strings, and produce a more sensible error message otherwise.
Somewhat independently of that, treat a zero (CP_ACP) result from
GetLocaleInfoEx() as meaning that we must use UTF-8 encoding.
Back-patch to all supported branches.
Juan José Santamaría Flecha
Discussion: https://postgr.es/m/24905.1585445371@sss.pgh.pa.us
Following up on 2dc16efed, petalura has suffered some additional
failures in stats_ext which again appear to be around the timing of an
autovacuum during the test, causing instability in the row estimates.
Again, let's fix this by explicitly performing a VACUUM on the table
and not leave it to happen by chance of an autovacuum pass.
Discussion: https://postgr.es/m/CAApHDvok5hmXr%2BbUbJe7%2B2sQzWo4B_QzSk7RKFR9fP6BjYXx5g%40mail.gmail.com
Previously while the startup process was waiting for the recovery conflict
with snapshot, tablespace or lock to be resolved, waiting was reported in
PS display, but not in the case of recovery conflict with buffer pin.
This commit makes the startup process in hot standby report waiting via PS
while waiting for the conflicts with other backends holding buffer pins to
be resolved.
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
The correspondence of settings between primary and standby is required
because those settings influence certain shared memory sizings that
are required for processing WAL records that the primary might send.
For example, if the primary sends a prepared transaction, the standby
must have had max_prepared_transaction set appropriately or it won't
be able to process those WAL records.
However, fatally shutting down the standby immediately upon receipt of
the parameter change record might be a bit of an overreaction. The
resources related to those settings are not required immediately at
that point, and might never be required if the activity on the primary
does not exhaust all those resources. If we just let the standby roll
on with recovery, it will eventually produce an appropriate error when
those resources are used.
So this patch relaxes this a bit. Upon receipt of
XLOG_PARAMETER_CHANGE, we still check the settings but only issue a
warning and set a global flag if there is a problem. Then when we
actually hit the resource issue and the flag was set, we issue another
warning message with relevant information. At that point we pause
recovery, so a hot standby remains usable. We also repeat the last
warning message once a minute so it is harder to miss or ignore.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
This commit adds query_string argument into the planner-related functions
and hook and allows us to pass the query string to them.
Currently there is no user of the query string passed. But the upcoming patch
for the planning counters will add the planning hook function into
pg_stat_statements and the function will need the query string. So this change
will be necessary for that patch.
Also this change is useful for some extensions that want to use the query
string in their planner hook function.
Author: Pascal Legrand, Julien Rouhaud
Reviewed-by: Yoshikazu Imai, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAOBaU_bU1m3_XF5qKYtSj1ua4dxd=FWDyh2SH4rSJAUUfsGmAQ@mail.gmail.com
Discussion: https://postgr.es/m/1583789487074-0.post@n3.nabble.com
Previously pg_stat_statements calculated the difference of buffer counters
by its own code even while BufferUsageAccumDiff() had the same code.
This commit expose BufferUsageAccumDiff() and makes pg_stat_statements
use it for the calculation, in order to simply the code.
This change also would be useful for the upcoming patch for the planning
counters in pg_stat_statements because the patch will add one more code
for the calculation of difference of buffer counters and that can easily be
done by using BufferUsageAccumDiff().
Author: Julien Rouhaud
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/bdfee4e0-a304-2498-8da5-3cb52c0a193e@oss.nttdata.com
The additional information displayed will be block number for error
occurring while processing heap and index name for error occurring
while processing the index.
This will help us in diagnosing the problems that occur during a vacuum.
For ex. due to corruption (either caused by bad hardware or by some bug)
if we get some error while vacuuming, it can help us identify the block
in heap and or additional index information.
It sets up an error context callback to display additional information
with the error. During different phases of vacuum (heap scan, heap
vacuum, index vacuum, index clean up, heap truncate), we update the error
context callback to display appropriate information. We can extend it to
a bit more granular level like adding the phases for FSM operations or for
prefetching the blocks while truncating. However, I felt that it requires
adding many more error callback function calls and can make the code a bit
complex, so left those for now.
Author: Justin Pryzby, with few changes by Amit Kapila
Reviewed-by: Alvaro Herrera, Amit Kapila, Andres Freund, Michael Paquier
and Sawada Masahiko
Discussion: https://www.postgresql.org/message-id/20191120210600.GC30362@telsasoft.com
Add more comments in ltree.h, and correct a misstatement or two.
Use a symbol, rather than hardwired constants, for the maximum length
of an ltree label. The max length is still hardwired in the associated
error messages, but I want to clean that up as part of a separate patch
to improve the error messages.
The documentation says that the max length is 255 bytes, but
code inspection says it's actually 255 characters; and relevant
lengths are stored as uint16 so that that works.
Put the temporary socket directory under TMPDIR, if that environment
variable is set, instead of the hardcoded /tmp.
This allows running the tests if there is no /tmp at all (for example
on Windows, although running the tests with Unix-domain sockets is not
enabled on Windows yet). We also use TMPDIR everywhere else /tmp is
hardcoded, so this makes the behavior consistent.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/54bde68c-d134-4eb8-5bd3-8af33b72a010@2ndquadrant.com
b07642dbc added code to trigger autovacuums based on the number of
inserts into a table. This seems to have caused some regression test
results to destabilize. I suspect this is due to autovacuum triggering a
vacuum sometime after the test's ANALYZE run and perhaps reltuples is
ending up being set to a slightly different value as a result.
Attempt to resolve this by running a VACUUM ANALYZE on the affected table
instead of just ANALYZE. pg_class.reltuples will still get set to whatever
ANALYZE chooses but we should no longer get the proceeding autovacuum
overriding that.
The overhead this adds to each test's runtime seems small enough not to
worry about. I measure 3-4% on stats_ext and can't measure any change in
partition_aggregate.
I'm unable to recreate the issue locally, so this is a bit of a blind
fix.
Discussion: https://postgr.es/m/CAApHDvpWmpqYrKwwDQyeDq8dAyK7GMNaxDhrG69CkSuXoEg%2BVg%40mail.gmail.com
Use IndexRelationGetNumberOfKeyAttributes() rather than
IndexRelationGetNumberOfAttributes() when determining whether or not two
index tuples are suitable for merging together into a single posting
list tuple. This is a little bit tidier. It brings affected code in
nbtdedup.c a little closer to similar, related code in nbtsplitloc.c.
Something like "*{2}.*{3}" should presumably mean the same as
"*{5}", but it didn't. Improve that.
Get rid of an undocumented and remarkably ugly (though not, as far as
I can tell, actually unsafe) static variable in favor of passing more
arguments to checkCond().
Reverse-engineer some commentary. This function, like all of ltree,
is still far short of what I would consider the minimum acceptable
level of internal documentation, but at least now it has more than
zero comments.
Although this certainly seems like a bug fix, people might not
thank us for changing query behavior in stable branches, so
no back-patch.
Nikita Glukhov, with cosmetic improvements by me
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
These uint16 fields could be overflowed by excessively long input,
producing strange results. Complain for invalid input.
Likewise check for out-of-range values of the repeat counts in lquery.
(We don't try too hard on that one, notably not bothering to detect
if atoi's result has overflowed.)
Also detect length overflow in ltree_concat.
In passing, be more consistent about whether "syntax error" messages
include the type name. Also, clarify the documentation about what
the size limit is.
This has been broken for a long time, so back-patch to all supported
branches.
Nikita Glukhov, reviewed by Benjie Gillam and Tomas Vondra
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
In 9.4 I added support to use a historical snapshot in
ScanPgRelation(), while adding logical decoding. Unfortunately a
conflict with the concurrent removal of SnapshotNow was incorrectly
resolved, leading to an unregistered snapshot being used.
It is not correct to use an unregistered (or non-active) snapshot for
anything non-trivial, because catalog invalidations can cause the
snapshot to be invalidated.
Luckily it seems unlikely to actively cause problems in practice, as
ScanPgRelation() requires that we already have a lock on the relation,
we only look for a single row, and we don't appear to rely on the
result's tid to be correct. It however is clearly wrong and potential
negative consequences would likely be hard to find. So it seems worth
backpatching the fix, even without a concrete hazard.
Discussion: https://postgr.es/m/20200229052459.wzhqnbhrriezg4v2@alap3.anarazel.de
Backpatch: 9.5-
Instead of using Newton's method to compute numeric square roots, use
the Karatsuba square root algorithm, which performs better for numbers
of all sizes. In practice, this is 3-5 times faster for inputs with
just a few digits and up to around 10 times faster for larger inputs.
Also, the new algorithm guarantees that the final digit of the result
is correctly rounded, since it computes an integer square root with
truncation, containing at least 1 extra decimal digit before rounding.
The former algorithm would occasionally round the wrong way because
it rounded both the intermediate and final results.
In addition, arrange for sqrt_var() to explicitly support negative
rscale values (rounding before the decimal point). This allows the
argument reduction phase of ln_var() to be optimised for large inputs,
since it only needs to compute square roots with a few more digits
than the final ln() result, rather than computing all the digits
before the decimal point. For very large inputs, this can be many
thousands of times faster.
In passing, optimise div_var_fast() in a couple of places where it was
doing unnecessary work.
Patch be me, reviewed by Tom Lane and Tels.
Discussion: https://postgr.es/m/CAEZATCV1A7+jD3P30Zu31KjaxeSEyOn3v9d6tYegpxcq3cQu-g@mail.gmail.com
As of Windows 10 version 1803, Unix-domain sockets are supported on
Windows. But it's not automatically detected by configure because it
looks for struct sockaddr_un and Windows doesn't define that. So we
just make our own definition on Windows and override the configure
result.
Set DEFAULT_PGSOCKET_DIR to empty on Windows so by default no
Unix-domain socket is used, because there is no good standard
location.
In pg_upgrade, we have to do some extra tweaking to preserve the
existing behavior of not using Unix-domain sockets on Windows. Adding
support would be desirable, but it needs further work, in particular a
way to select whether to use Unix-domain sockets from the command-line
or with a run-time test.
The pg_upgrade test script needs a fix. The previous code passed
"localhost" to postgres -k, which only happened to work because
Windows used to ignore the -k argument value altogether. We instead
need to pass an empty string to get the desired effect.
The test suites will continue to not use Unix-domain sockets on
Windows. This requires a small tweak in pg_regress.c. The TAP tests
don't need to be changed because they decide by the operating system
rather than HAVE_UNIX_SOCKETS.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/54bde68c-d134-4eb8-5bd3-8af33b72a010@2ndquadrant.com
Formerly we applied a functional dependency "a => b with dependency
degree f" using the formula
P(a,b) = P(a) * [f + (1-f)*P(b)]
This leads to the possibility that the combined selectivity P(a,b)
could exceed P(b), which is not ideal. The addition of support for IN
and OR clauses (commits 8f321bd16c and ccaa3569f5) would seem to make
this more likely, since the user-supplied values in such clauses are
not necessarily compatible with the functional dependency.
Mitigate this by using the formula
P(a,b) = f * Min(P(a), P(b)) + (1-f) * P(a) * P(b)
instead, which guarantees that the combined selectivity is less than
each column's individual selectivity. Logically, this is modifies the
part of the formula that accounts for dependent rows to handle cases
where P(a) > P(b), whilst not changing the second term which accounts
for independent rows.
Additionally, this refactors the way that functional dependencies are
applied, so now dependencies_clauselist_selectivity() estimates both
the implying clauses and the implied clauses for each functional
dependency (formerly only the implied clauses were estimated), and now
all clauses for each attribute are taken into account (formerly only
one clause for each implied attribute was estimated). This removes the
previously built-in assumption that only equality clauses will be
seen, which is no longer true, and opens up the possibility of
applying functional dependencies to more general clauses.
Patch by me, reviewed by Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCXaNFZyOhR4XXAfkvj1tibRBEjje6ZbXwqWUB_tqbH%3Drw%40mail.gmail.com
Discussion: https://postgr.es/m/20200318002946.6dvblukm3cfmgir2%40development
Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
Delaying unlocking the right child page until after the point that the
left child's parent page has been refound is no longer truly necessary.
Commit 40dae7ec made nbtree tolerant of interrupted page splits. VACUUM
was taught to avoid deleting a page that happens to be the right half of
an incomplete split. As long as page splits don't unlock the left child
page until the end of the second/final phase, it should be safe to
unlock the right child page earlier (at the end of the first phase).
It probably isn't actually useful to release the right child's lock
earlier like this (it probably won't improve performance). Even still,
pointing out that it ought to be safe to do so should make it easier to
understand the overall design.
Bruce Momjian